메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Lei Gao (Harbin University of Science and Technology) Feng Li (Harbin University of Science and Technology) Ye Wang (Harbin University of Science and Technology) Xing Mao Xiao (Southwest Technique and Engineering Research Institute) Peng Da Huo (Harbin University of Science and Technology)
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.28 No.8
발행연도
2022.8
수록면
1,960 - 1,970 (11page)
DOI
10.1007/s12540-021-01077-5

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Solid-state bonding of heterogeneous materials is one of the effective ways to achieve light weight. An extrusion formingprocess for Mg/Al thickness-oriented bonding sheet was carried out. Due to triaxial compressive stress in the extrusion container,the AZ31 and AA6061 billets were deformed and the bonding and forming of Mg/Al thickness-oriented sheet can berealized by this method. The observation results of the bonding position by using XRD, SEM and EDS showed that: at theforming temperature with 360–420 °C, it had a good bonding interface, and the width of the transition layer increased withthe increase of the forming temperature. The presence of brittle intermetallic compounds in the transition layer indicated thatmetallurgical bonding had occurred at the interface. Considering all factors comprehensively, when the forming temperaturewas 390 °C, the bonding quality was appropriate. Its tensile-shear strength was 42 MPa, the width of the interface transitionlayer was about 10 μm, and the microhardness was about 164.3 HV. This method provided scientific guidance and technicalreserves for green forming of Mg/Al sheets.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0