지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
In this study, cooling and heat-transfer tests are performed to compare and evaluate the thermal conductivity in a prepared CNT TIM (thermal interface material). A polymerized CNT heat-transfer resin and commercial thermal grease (Shinetsu G-747) were applied for a comparison test in both cases.
Cooling experiments with an aluminum foil specimen were performed in order to measure the temperature distribution using an infrared camera, and in heat radiation experiments, performance testing of the thermal conductivity was conducted using high-power LEDs. Carbon resin with the polymerization of graphite and carbon black, and CNT-polymerized CNT resin with graphite and carbon black were tested and compared with using G-747. It was found that the cooling performance and the heat transfer ability in both the carbon resin and the CNT-polymerized CNT resin were greater than those of G-747 because the temperature by 5.0℃ in both cases appeared lower than that of the G-747.
Cooling experiments with an aluminum foil specimen were performed in order to measure the temperature distribution using an infrared camera, and in heat radiation experiments, performance testing of the thermal conductivity was conducted using high-power LEDs. Carbon resin with the polymerization of graphite and carbon black, and CNT-polymerized CNT resin with graphite and carbon black were tested and compared with using G-747. It was found that the cooling performance and the heat transfer ability in both the carbon resin and the CNT-polymerized CNT resin were greater than those of G-747 because the temperature by 5.0℃ in both cases appeared lower than that of the G-747.
목차
ABSTRACT
1. 서론
2. CNT 열전달 수지
3. 냉각과 방열 성능 테스트 및 고찰
4. 결론
REFERENCES
참고문헌 (13)
참고문헌 신청
1. [학술지(정기간행물)] - Bruce S. / 2003 / Technologies that Deserve to Die / MIT's Technology Review
2. [기타자료] - / 2002 / Light Emitting Diodes(LEDs) for General Illumination / OIDA Technology Roadmap
3. [보고서] - / 2006 / LED Lighting Technology Lessons from the USA
4. [보고서] - Yoo, J. Y. / 2005 / Patent technology Trends of LED Heat Radiation Technology
5. [학술대회논문] - Kim, G. H. / 2008 / A Study on the Micro-cutting Process Characteristics of Copper for Manufacturing a Subminiature Radiation Plate / Proceedings of the KSMTE Spring Conference 2008 : 296 ~ 301
2. [기타자료] - / 2002 / Light Emitting Diodes(LEDs) for General Illumination / OIDA Technology Roadmap
3. [보고서] - / 2006 / LED Lighting Technology Lessons from the USA
4. [보고서] - Yoo, J. Y. / 2005 / Patent technology Trends of LED Heat Radiation Technology
5. [학술대회논문] - Kim, G. H. / 2008 / A Study on the Micro-cutting Process Characteristics of Copper for Manufacturing a Subminiature Radiation Plate / Proceedings of the KSMTE Spring Conference 2008 : 296 ~ 301
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2016-581-001043380