지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
A reliability acceptance sampling plan (RASP) consists of a set of life test procedures and rules for either accepting or rejecting a collection of items based on the sampled lifetime data. Most of the existing RASPs are concerned with the case where test items are available at the same time. However, as in the early stage of product development, it may be difficult to secure test items at the same time. In such a case, it is inevitable to conduct a life test using sequentially supplied samples.
In this paper, it is assumed that test items are sequentially supplied, the lifetimes of test items follow an exponential distribution, failures are monitored continuously, arrival times of test items are known, and the number of test items at each arrival time is given. Under these assumptions, RASPs are developed by determining the test completion time and the critical value for the maximum likelihood estimator of the mean lifetime such that the producer and consumer risks are satisfied. Then, the developed plans are compared to the traditional Type-I censored RASPs in terms of the test completion time. Computational results indicate that the test completion time of the developed RASP is shorter than that of the traditional Type-I censored plan in most cases considered. It is also found that the superiority of the developed RASP becomes more prominent as the inter-arrival times of test items increase and/or the total number of test items gets larger.
In this paper, it is assumed that test items are sequentially supplied, the lifetimes of test items follow an exponential distribution, failures are monitored continuously, arrival times of test items are known, and the number of test items at each arrival time is given. Under these assumptions, RASPs are developed by determining the test completion time and the critical value for the maximum likelihood estimator of the mean lifetime such that the producer and consumer risks are satisfied. Then, the developed plans are compared to the traditional Type-I censored RASPs in terms of the test completion time. Computational results indicate that the test completion time of the developed RASP is shorter than that of the traditional Type-I censored plan in most cases considered. It is also found that the superiority of the developed RASP becomes more prominent as the inter-arrival times of test items increase and/or the total number of test items gets larger.
목차
1. 서론
2. 문헌 연구
3. 축차적 시료 공급 하에서의 RASP
4. 결론
참고문헌
참고문헌 (6)
참고문헌 신청
Bernardo,M. V. P , 2000 , Group Sequential Designs for Cure Rate Models with Early Stopping in Favor of Null Hypothesis 19 : 3023 ~ 3035
Hauck, D. J. , 1997 , Robustness of the Exponential Sequential Probability Ratio Test (SPRT) when Weibull Distributed Failures are Transformed Using a “Known” Shape Parameter 37 : 1835 ~ 1840
Jeong , 1994 , Development and Comparisons of Reliability Acceptance Sampling Plans for Exponential and Gamma Lifetime Distributions
Kao , 1979 , A Simple Procedure for Computing Performance Characteristics of Truncated Sequential Tests with Exponential Lifetimes tech (metrics) : 229 ~ 232
Kim, S. H. , 2000 , Comparisons of Exponential Life Test Plans with Intermittent Inspections 32 : 217 ~
Hauck, D. J. , 1997 , Robustness of the Exponential Sequential Probability Ratio Test (SPRT) when Weibull Distributed Failures are Transformed Using a “Known” Shape Parameter 37 : 1835 ~ 1840
Jeong , 1994 , Development and Comparisons of Reliability Acceptance Sampling Plans for Exponential and Gamma Lifetime Distributions
Kao , 1979 , A Simple Procedure for Computing Performance Characteristics of Truncated Sequential Tests with Exponential Lifetimes tech (metrics) : 229 ~ 232
Kim, S. H. , 2000 , Comparisons of Exponential Life Test Plans with Intermittent Inspections 32 : 217 ~
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Sampling Plans Based on Truncated Life Test for a Generalized Inverted Exponential Distribution
Industrial Engineering & Management Systems
2015 .06
-
수명이 대수정규분포를 따르는 제품에 대한 경제적인 신뢰성 입증시험 설계
신뢰성응용연구
2012 .03
-
Development of Japanese-Computerized Adaptive Test
ITC-CSCC :International Technical Conference on Circuits Systems, Computers and Communications
2008 .07
-
자동차용 유해가스 검출기의 신뢰성 평가기준
신뢰성응용연구
2010 .12
-
신제품 개발에 따른 효과적인 신뢰성 시험 설계
신뢰성응용연구
2009 .06
-
압력보상형 유압펌프 신뢰성 시험평가 기술
신뢰성응용연구
2011 .12
-
Design of a Life Test Sampling Plan Based on the Cost Model
International Journal of Reliability and Applications
2005 .06
-
휴대폰용 전력증폭기의 신뢰성 평가기준
신뢰성응용연구
2009 .09
-
Evaluation Criteria of Reliability on Transmission Control Unit for Passenger Car
International Journal of Reliability and Applications
2010 .06
-
팬터그래프 형식시험에 관한 고찰
한국철도학회 학술발표대회논문집
2010 .10
-
EXTRACTION OF SERVICE DESIGN ITEMS IN RESTAURANTS BY THE SENTENCE COMPLETION TEST
대한인간공학회 학술대회논문집
2012 .05
-
Optimal Allocation of Test Items in an Accelerated Life Test under Model Uncertainty
대한산업공학회지
1988 .12
-
고속열차 추진성능 시험평가
한국철도학회 학술발표대회논문집
2010 .07
-
트랙터용 기계-유압식 무단변속기의 시험평가에 관한 연구
신뢰성응용연구
2019 .09
-
Acceptance Sampling Plan for Truncated Life Tests Based on Generalized Pareto Distribution using Mean Life
Industrial Engineering & Management Systems
2020 .09
-
광기기 저장매체 구동용 BLDC 모터의 신뢰성 평가기준
신뢰성응용연구
2009 .03
-
A Study of the Questionnaire Items for Human Reliability Analysis
대한인간공학회 학술대회논문집
2018 .11
-
Accelerated life test plans with optimum censoring time
대한산업공학회 추계학술대회 논문집
1996 .10
-
성능특성치의 열화가 와이블 분포를 따를 때 가속열화시험을 활용한 신뢰성 샘플링검사계획의 개발
신뢰성응용연구
2018 .06
-
승용차용 전장시험 자동화 시스템 설계
한국자동차공학회논문집
2001 .01
이 논문의 저자 정보
이 논문과 함께 이용한 논문
점진적 정수 중단 하에서의 와이블분포에 대한 계량형 샘플링검사
이상호
,
전치혁
,
S.Balamu
외 1명
대한산업공학회 춘계공동학술대회 논문집
2005
.05
한정고장집단의 출하품질 보증을 위한 샘플링검사방식 설계
권영일
한국신뢰성학회 학술대회논문집
2002
.06
수명이 지수분포를 따를 때 정기검사 및 정시종결하에서 신뢰성 샘플링검사계획의 개발
김갑석
,
서순근
대한산업공학회 춘계공동학술대회 논문집
1994
.04
수명이 지수분포를 따를 때 정기검사 및 정시종결하에서 신뢰성 샘플링검사 계획의 개발
김갑석
,
서순근
한국경영과학회 학술대회논문집
1994
.01
예방정비 최적화를 위한 중도절단 자료의 최적 샘플링 방안
이인현
,
오세화
,
이창룡
외 2명
한국철도학회 논문집
2013
.06
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2013-530-003585255