메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
장범택 (경북대학교) 김석삼 (경북대학교)
저널정보
한국트라이볼로지학회 한국트라이볼로지학회 학술대회 한국윤활학회 2008년도 제46회 춘계학술대회
발행연도
2008.6
수록면
61 - 66 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Steel wires are critical load-bearing components in a wide range of applications such as elevator, cranes, mine haulage, etc. The traction machine of elevator which transmits power to wire rope causes micro-slip between wire rope and sheave during reciprocating action. The lubrication condition of wire rope is also changed due to the lack of grease. This study focuses on the wear behavior of steel wire and effect of both dry and grease conditions by using the rolling/sliding contact wear tester done under various slip rations and rolling speeds. The experimental results of the wear volume curve against the number of revolutions under the grease condition are compared with the results under dry condition. The worn surface of steel wire and the size of wear particles were observed by SEM. In order to quantify the wear volume of steel wire we established an equation and finally obtained the wear coefficient which is in the range of 7*0 ?? to 3*0 ?? under grease lubrication.

목차

ABSTRACT
1. 서론
2. 실험
3. 결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-551-002336324