메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
한국유체기계학회 한국유체기계학회 학술대회 논문집 유체기계공업학회 제4회 한국유체공학학술대회 논문집 (제2권)
발행연도
2006.8
수록면
1,133 - 1,136 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In order to measure gas flux, there are some techniques based on volume flux and mass flux. The mass flux measurement is more favored to measure correctly gas flux under the extremely - high thermal or extremely - low pressure conditions. The thermal mass flow-meter is the representative technique to measure mass flux. In designing the flow-meter, it is important to calibrate convectional thermal coefficient affected by flow velocities around sensor and thermal changes. To analyze quantitatively the convectional mechanism around cylinders in high thermal external flow , experiments are conducted through installing 40m3/min blower at 100 mm duct for high thermal gases and heater able to bring ambient gas up to 200 ℃. By using control valves at the end point of duct, we controlled fluid velocities. By installing Pt 100 sensor to the heater, fluid temperature is controlled. In this experiment, convectional coefficients around cylinders are proportional to velocity to the power of 0.45 . A and B in the correlation equation coefficients behaved independently at 105 ℃

목차

Abstract
1. 서론
2. 배경 이론
3. 실험 장치 구성
4. 결과
5. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-554-002112478