지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2007.10
- 수록면
- 63 - 79 (17page)
이용수
초록· 키워드
오류제보하기
Several remedial works were attempted to stabilize the collapsed area of the inlet slopes of diversion tunnel, but prevention of any further movement was being only carried out at beginning stage by filling the area with aggregates and rock debris, after several cracks had been initiated and developed around the area. The extra specially developed folding zone is consisted with highly weathered Greywacke and Black shale. The suggested solution is to improve the properties of the rock mass of failed area by choosing the optimum level of reinforcement through the increment of slope rock support design so as to control the movement of slopes during the re-excavation.
The Bakun hydroelectric project includes the construction of a hydroelectric power plant with an installed capacity of 2,520MW and a power transmission system connecting to the existing transmission networks in Sarawak and Western Malaysia. The power station will consist of a 210m height Concrete Faced Rockfill Dam. During the construction of the dam and the power facilities the Balui River has to be diverted of the tunnels is 12m and the tunnel width is 16m at the portal area. This paper describes the stability analysis and design methods for the open cut rock slopes in the inlet area of the diversion tunnels. The geotechnical parameters employed in stability calculations were given as a function of four defined Rock Mass Type (RMT) which were based on RMR system from Bieniawski. The stability calculations procedure of the rock slopes are divided into two stages.
In the first stage, it is calculated for the stability of each "global" slope without any rock support and shotcrete system. In the second stage, it is calculated for each "local" slope stability with berms and supported with rock bolts and shotcrete. The monitering instrumentation was performed continuously and some of the design modification was carried out in order to increase the safety of failed area based on the unforeseen geological risks during the open cut excavation.
The Bakun hydroelectric project includes the construction of a hydroelectric power plant with an installed capacity of 2,520MW and a power transmission system connecting to the existing transmission networks in Sarawak and Western Malaysia. The power station will consist of a 210m height Concrete Faced Rockfill Dam. During the construction of the dam and the power facilities the Balui River has to be diverted of the tunnels is 12m and the tunnel width is 16m at the portal area. This paper describes the stability analysis and design methods for the open cut rock slopes in the inlet area of the diversion tunnels. The geotechnical parameters employed in stability calculations were given as a function of four defined Rock Mass Type (RMT) which were based on RMR system from Bieniawski. The stability calculations procedure of the rock slopes are divided into two stages.
In the first stage, it is calculated for the stability of each "global" slope without any rock support and shotcrete system. In the second stage, it is calculated for each "local" slope stability with berms and supported with rock bolts and shotcrete. The monitering instrumentation was performed continuously and some of the design modification was carried out in order to increase the safety of failed area based on the unforeseen geological risks during the open cut excavation.
목차
Abstract
1. Introduction
2. Geological Survey
3. Geotechnical Parameter
4. Sedimentary Rock Slope Design of the Open-Cut Excavation
5. Results of Slope Stability Analysis
6. Inlet Slope Failure and Design Modification
7. Conclusion
References
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
암반사면의 안정성 평가를 위한 간편한 안정성평가기준의 제시
한국지반환경공학회 학술발표회논문집
2001 .09
-
화산쇄설암 사면의 안정 특성
한국방재학회 학술대회
2008 .01
-
Simulation Analysis of Rock Mechanics and Rock Engineering Problems by Distinct Element Method : Shear Testing of Rock Joint. Rock Slope and Tunnelling
한국암반공학회 학술대회 및 세미나 자료집
2005 .03
-
Case Study on Stability Analysis of Phyllite Rock Slopes in National Road Construction
International Journal of Geo-Engineering
2011 .09
-
Three dimensional seismic and static stability of rock slopes
Geomechanics & engineering
2015 .01
-
터널 갱구부 사면안정 검토 및 보강에 관한 연구
한국지반환경공학회 학술발표회논문집
2015 .09
-
수치해석에 의한 암반특성의 변화가 터널에 미치는 영향
한국철도학회 학술발표대회논문집
2007 .05
-
Reliability analysis of three-dimensional rock slope
Geomechanics & engineering
2018 .01
-
Limit analysis of 3D rock slope stability with non-linear failure criterion
Geomechanics & engineering
2016 .01
-
Stability analysis of a rock slope in Himalayas
Geomechanics & engineering
2010 .01
-
Analysis of Rock Cutting Simulation Using Finite Element Method
한국철도학회 학술발표대회논문집
2015 .05
-
Assessment of rock slope stability by slope mass rating (SMR): A case study for the gas flare site in Assalouyeh, South of Iran
Geomechanics & engineering
2017 .01
-
암반특성의 수직변화가 암반분류에 미치는 영향에 관한 수치해석적 연구
한국철도학회 학술발표대회논문집
2007 .11
-
변성퇴적암류로 구성된 대규모 암반사면의 붕괴원인 분석에 관한 사례 연구
터널과 지하공간
2006 .12
-
안동시 OO지역 암반사면의 안정해석에 관한 연구
한국방재학회 학술대회
2008 .01
-
암반사면의 안정해석에 관한 연구
대한토목학회 학술대회
2002 .11
-
복잡한 형상의 활동면에서 3차원 안정해석 사례소개
한국지반환경공학회 학술발표회논문집
2010 .05
-
암종별 특성이 고려된 국내절취사면의 유지관리방안에 관한 연구
한국지반공학회논문집
2008 .02
-
암반사면의 붕괴와 극복사례
한국방재학회 학술대회
2007 .01
-
절리암반에서의 근접사면굴착에 의한 기존터널 거동에 대한 실험적 연구
한국터널지하공간학회 논문집
2009 .01
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0