메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
한국태양에너지학회 한국태양에너지학회 학술대회논문집 한국태양에너지학회 2004 Proceedings ISEA Asia-Pacific
발행연도
2004.10
수록면
46 - 49 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In our work the low cost SSP ribbons were prepared by SSP technology, and the characterization of surface morphology and composition were conducted by SEM and AES methods. The poly-Si thin film solar cells on low cost SSP substrates were fabricated by means of RTCVD and other standard process. SEM results demonstrate SSP ribbons are very compact in the inner structure and the top layer is much thicker than the bottom. AES experiments display that the content of Si on the top surface of SSP is much higher than that on the back. Using low cost SSP ribbon as substrate the poly-Si thin film solar cells were prepared, and the conversion efficiency reaches 5-8%. Because of lower purity of used Si powder (∼4N) and also a smaller grain size (<lOO㎛), so the efficiency is lower, however, using the electronic grade Si powder with a big grain diameter, then the efficiency of the cells can be much higher. So the purity and the grain size of Si powder are two main factors to affect the efficiency of the solar cells.

목차

Abstract

Introduction

Experimental

Results and discussion

Conclusion

References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-563-018203102