메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
한국자동차공학회 한국자동차공학회 춘 추계 학술대회 논문집 한국자동차공학회 1998년 추계학술대회논문집 1호
발행연도
1998.11
수록면
166 - 171 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The effect of the inter-ring crevice, the volume between the top and the second piston rings, on unburned hydrocarbon (UHC) emission was experimentally and numerically investigated. The ultimate goal of this study was to reduce the level of UHC emission by minimizing the blow-up of the unburned gases trapped in the inter-ring crevice. For this purpose, the unburned mixture trapped in the inter-ring crevice was extracted to the crankcase during the late period of the expansion stroke and the early period of the exhaust stroke through the engraved grooves on the lower part of the cylinder wall. The extraction of the mixture from the inter-ring crevice resulted in significant reductions of UHC emission over a range of speeds and loads, without any losses of efficiency and power. A physical model for predicting the gas flow into and from the inter-ring crevice was also adopted to simulate the effect of the grooves on the lower part of cylinder wall. The calculated results agreed well with the measurements and could explain the mechanism of UHC emission reduction achieved with the grooved cylinder liners. This consistency has confirmed the importance of the inter-ring crevice on UHC emission in an SI engine.

목차

ABSTRACT

1.서론

2.실험방법 및 장치

3.가스유동 모델링

3.결과 및 해석

4.결론

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-556-014121139