메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, a new type of laser-induced ignition was developed. Without focusing laser beam, it was possible to ignite combustible mixtures by reducing the laser beam diameter to a small value and directing that beam into a small conical cavity. Shadowgraphs for the early stages of combustion process showed that a hot gas jet is ejecting from the cavity, especially when burning lean mixture. After a very short time, the hot gas jet had finished issuing and the flame behavior is quite similar to flame propagation initiated by a conventional spark plug. This type of ignition exhibits more rapid and a higher maximum pressure rise than center ignition with a significant decrease in the combustion duration. Also, the combustion process with this type of ignition was simulated using a part of KIVA-II and good agreement between experimental and calculated results of temperature distribution was obtained.

목차

ABSTRACT

1.서론

2.실험 장치 및 방법

3.수치 해석 모델링

4.실험 결과 및 방법

5.결론

6.참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-556-014119591