메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국자동차공학회 한국자동차공학회논문집 한국자동차공학회논문집 제7권 제4호
발행연도
1999.4
수록면
108 - 116 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
The rotational movements of piston rings were measured by a radiotracer technique in a single cylinder engine. In order to measure the rotation of the top and 2'nd ring simultaneously, two kinds of isotopes, ^60Co and ^192Ir, were used and mounted in each rings. 3 NaI r -ray detectors were used to measure r -ray intensities. While motoring the assembled engine, the r -ray intensities were measured with the ring gap fixed at a certain angle, and as a result of repeating this procedure, the relationship between the gap angle and r -ray intensities was calculated. Based on these calibration results, algorithm was made to determine the gap angle from the measured r -ray intensities and the uncertainties was below 20° with 95% confidence level. As results of the experiment, it was known that the movement of each ring isn't dependent on the other ring and also isn't regular at same operating condition. The rotational speed was within the range of 0.2~0.4 rev/min. Even though the movement patterns were arbitrary at the same condition, the tendency was found that the ring can rotate easily at low load condition.

목차

ABSTRACT

1.서론

2.측정 원리

3.보정 실험 과정 및 방법

4.실험 결과

5.결론

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-556-013966281