메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김신 (Korea Institute of Industrial Technology) 이인식 (Korea Institute of Industrial Technology) 김영국 (Pukyong National University)
저널정보
한국조명·전기설비학회 조명·전기설비학회논문지 조명·전기설비학회논문지 제39권 제2호
발행연도
2025.4
수록면
107 - 112 (6page)
DOI
10.5207/JIEIE.2025.39.2.107

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper investigates the variations in plasma generation voltage based on different power supply types, including DC, AC, and pulsed sources, to gain deeper insights into their effects on plasma formation and overall efficiency. Aluminum was chosen as the plasma electrode due to its high electrical conductivity and widespread availability. Experiments were conducted both in ambient air and using aluminum oxide (Al2O3) as the dielectric material to examine the impact of environmental and material conditions on the plasma generation process. The power supply outputs ranged from 1 to 10kV at a frequency of 10kHz. For the AC source, both square and sine waveforms were utilized. DC and AC voltages were generated with a signal generator and amplifier to control the reference voltage and frequency. Pulsed power was produced using two configurations: a 50μs pulse width generated by a signal generator and amplifier, and a custom-designed power supply capable of producing a 500ns pulse width. The study focused on analyzing the effects of different power types, pulse widths, and waveforms on the plasma generation voltage. This research provides valuable experimental data for optimizing plasma generation by exploring the influence of various power supply configurations. By investigating the roles of DC, AC, and pulsed power in plasma formation, this paper contributes to a more comprehensive understanding of plasma generation mechanisms and offers insights for enhancing the efficiency of plasma systems.

목차

Abstract
1. 서론
2. 플라즈마 발생용 펄스전원 개발
3. 플라즈마 실험용 지그 제작
4. 실험결과
5. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0