메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Yi Li (Shandong University) Jiong Zhang (Shandong University) Jie Ding (Shandong University) Feng‑zhen Chen (Shandong Dayu Water Construction Group) Ming‑zhu Liu (Shandong Dayu Water Construction Group) Jia Liu (Shandong University) Zhao Hou (Shandong University)
저널정보
한국콘크리트학회 International Journal of Concrete Structures and Materials International Journal of Concrete Structures and Materials Vol.19 No.2
발행연도
2025.3
수록면
461 - 483 (23page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Solid waste materials (SWM) are commonly used in the preparation of building materials due to their structural characteristics and chemical composition. Pervious concrete (PC) is a green infrastructure material that offers advantages such as reducing surface runoff and purifying water quality, making it an important component of sponge cities. This study aims to investigate the physical properties and micro-structure of PC prepared from various SWM and determine the optimal mix proportion. In this study, three common SWM, including muck, steel slag (SS) and fly ash (FA), are used as raw materials. The chemical composition and physical properties of SWM are analyzed. A five-level and five-factor test scheme is developed using the orthogonal test method. This scheme considers the target porosity, water–cement ratio, muck content, SS content, and FA content as variables. The mechanical properties and permeability of PC, including compressive strength, porosity and permeability coefficient are evaluated. The internal structure of PC is observed using a scanning electron microscope (SEM). The results indicate that the optimal mix proportion for preparing PC is determined through efficiency coefficient method analysis: target porosity of 25%, water–cement ratio of 0.36, muck content of 10%, SS content of 10%, and FA content of 12.5%. The corresponding performance indicators of the PC sample are measured as follows: porosity of 24.67%, compressive strength of 15.78 MPa, and permeability coefficient of 2.23 mm/s. This study provides valuable insights for the rapid and flexible batching and performance optimization research of PC based on SWM.

목차

Abstract
1. Introduction
2. Experimental Investigation
3. Results and Discussion
4. Conclusion
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-151-25-02-092490188