지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국콘크리트학회 International Journal of Concrete Structures and Materials International Journal of Concrete Structures and Materials Vol.19 No.1
- 발행연도
- 2025.1
- 수록면
- 17 - 43 (27page)
이용수
초록· 키워드
오류제보하기
The current KDS 14 design method yields reasonable accuracy with acceptable safety in assessing the unbalanced moment-carrying capacity of slab–column connections. However, the model requires considerable computational effort owing to the effects of various design parameters, particularly the gravity-load effect. This study proposes a method to simplify the KDS 14 model to evaluate the unbalanced moment-carrying capacity of slab–column connections. In the proposed method, the gravity-load effect is decoupled from equations used for evaluating unbalanced moment-carrying capacity components. Subsequently, the total unbalanced moment-carrying capacity is determined by establishing an interaction between the gravity shear ratio and unbalanced moment components without considering the gravity-load effect. For practical design purposes, final simplified design equations are proposed. The reliability of the simplified method is validated based on a comparison with the current KDS 14 design code using a comprehensive database encompassing interior, exterior, and corner slab–column connections. Furthermore, a parametric study based on the proposed simplified approach, current design codes, combined with finite-element (FE) analysis is performed to elucidate the effects of constituents on the unbalanced moment-carrying capacity of corner slab–column connections. The results show that the proposed simplified model and KDS design method are strongly correlated with the experimental and FE results for a range of design parameters. Mean-while, the ACI 318 model consistently provides a lower limit for strength prediction, thus yielding overly conservative and safe results compared with the test and FE results in most cases.
목차
Abstract
1. Introduction
2. Development of Simplified Method for Slab- Column Connections Subjected to Unbalanced Moment
3. Assessment of Simplified Approaches
4. Parametric Study Using FE Analysis
5. Conclusions
References
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
비선형유한요소해석을 통한 슬래브-기둥 접합부의 불균형휨모멘트 강도 평가
한국콘크리트학회 학술대회 논문집
2024 .11
-
Development and evaluation of punching shear database for flat slab-column connections without shear reinforcement
Structural engineering and mechanics : An international journal
2018 .01
-
Simplified Effective Compressive Strengths of Columns with Intervening Floor Slabs
International Journal of Concrete Structures and Materials
2020 .09
-
Failure characteristics of columns intersected by slabs with different compressive strengths
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
Modified models predicting punching capacity of edge column-slab joints considering different codes
Structural Engineering and Mechanics, An Int＇l Journal
2024 .02
-
Simplified P-M interaction curve model for reinforced concrete columns exposed to standard fire
Computers and Concrete, An International Journal
2017 .01
-
Punching Shear Behavior of Shear Reinforced Slab-Column Connection with Varying Flexural Reinforcement
International Journal of Concrete Structures and Materials
2019 .05
-
Effect of fiber reinforcing on instantaneous deflection of self-compacting concrete one-way slabs under early-age loading
Structural engineering and mechanics : An international journal
2018 .01
-
Effect of fiber reinforcing on instantaneous deflection of self-compacting concrete one-way slabs under early-age loading
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
얇은 강판을 사용한 합성 보-기둥 외부접합부의 반복하중 실험
대한건축학회 논문집 - 구조계
2017 .08
-
Effect of connection modeling on the seismic response of steel braced non-moment resisting frames
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
딥러닝을 이용한 중간말뚝이 있는 지하구조물의 슬래브 모멘트 예측
공학기술논문지
2024 .09
-
Simplified Design Procedure for Reinforced Concrete Columns Based on Equivalent Column Concept
International Journal of Concrete Structures and Materials
2016 .09
-
슬림 프리캐스트 슬래브 데크를 사용한 I-슬래브 시스템의 휨 성능에 관한 실험적 연구
대한건축학회 논문집 - 구조계
2015 .07
-
Predicting the moment capacity of RC slabs with insulation materials exposed to fire by ANN
Structural engineering and mechanics : An international journal
2017 .01
-
Punching Shear Failure of Concrete Ground Supported Slab
International Journal of Concrete Structures and Materials
2018 .05
-
Seismic behavior of RC building by considering a model for shear wall-floor slab connections
Computers and Concrete, An International Journal
2015 .01
-
Seismic Performance of High-Rise Intermediate Steel Moment Frames according to Rotation Capacities of Moment Connections
International journal of high-rise buildings
2015 .01
-
KDS 41 17 00의 지진하중
한국강구조학회지
2019 .06
-
A Simplified Method to Predict Damage of Axially-Loaded Circular RC Columns Under Lateral Impact Loading
International Journal of Concrete Structures and Materials
2020 .07
이 논문의 저자 정보
최근 본 자료
댓글(0)
0