지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2024.2
- 수록면
- 50 - 54 (5page)
이용수
초록· 키워드
오류제보하기
In this paper, the process of extruding Cu-10Fe alloy using a finite element analysis (FEA) was theoretically analyzed. To achieve this, the dependence of strain rate and temperature of the alloy required for the extrusion process was secured by utilizing databases for Cu and Fe and the KHL model. For microstructure analysis, FE-SEM with EDS was used to distinguish the phases present in Cu-10Fe alloy. The mechanical characteristics of Cu-10Fe alloy were secured using the results of fitting the mechanical properties of Copper and Steel from the Deform database to the KHL model. The deformation behavior within the alloy during hot extrusion was analyzed, providing insights into effective stress, effective strain, effective strain rate, and temperature. It was observed that the strain distribution was non-uniform. These research findings contribute to an improved understanding of the hot extrusion process of Cu-10Fe alloy and can aid in predicting the mechanical properties of the material.
목차
Abstract
1. 서론
2. 실험방법
3. 유한요소해석
4. 결과
5. 결론
REFERENCES
참고문헌 (14)
참고문헌 신청
Y. Yamano, 2011, Development of Aluminum Wireing Harness, SEI Technical Review, pp. 81-88.
K. Hanazaki, N.Shigiri, N.Tsuji, 2010, Change in Microstructure and Mechanical Properties During Deep Wire Drawing of Copper, Mater. Sci. Eng. A, 527, pp. 96-103, https://doi.org/10.1016/j.msea.2010.05.057
J.G. Bae, Y.S. Yang, D.Y. Ban, C.G. Park, 2006, The Effects of Die Design and Die Series on the Surface Residual Stress of Cold Drawn Eutectoid Steel Wire, Trans. Mater. Process., Vol 15, No. 2, pp. 153-157, https://doi.org/10.5228/KSPP.2006.15.2.153
D.W. Yuan, H. Zeng, X.P. Xiao, H. Wang, B.J. Han, B.X. Liu, B. Yang, 2021, Effect of Mg addition on Fe phase morphology, distribution and aging kinetics of Cu-6.5Fe alloy, Mater. Sci. Eng. A, 812, pp. 141064, https://doi.org/10.1016/j.msea.2021.141064
N.D. Stepanov, A.V. Kuznetsov, G.A. Salishchev, N.E. Khlebova, V.I. Pantsyrny, 2013, Evolution of microstructure and mechanical properties in Cu-14%Fe alloy during severe cold rolling, Mater. Sci. Eng. A, 564, 264-72, https://doi.org/10.1016/j.msea.2012.11.121
K. Hanazaki, N.Shigiri, N.Tsuji, 2010, Change in Microstructure and Mechanical Properties During Deep Wire Drawing of Copper, Mater. Sci. Eng. A, 527, pp. 96-103, https://doi.org/10.1016/j.msea.2010.05.057
J.G. Bae, Y.S. Yang, D.Y. Ban, C.G. Park, 2006, The Effects of Die Design and Die Series on the Surface Residual Stress of Cold Drawn Eutectoid Steel Wire, Trans. Mater. Process., Vol 15, No. 2, pp. 153-157, https://doi.org/10.5228/KSPP.2006.15.2.153
D.W. Yuan, H. Zeng, X.P. Xiao, H. Wang, B.J. Han, B.X. Liu, B. Yang, 2021, Effect of Mg addition on Fe phase morphology, distribution and aging kinetics of Cu-6.5Fe alloy, Mater. Sci. Eng. A, 812, pp. 141064, https://doi.org/10.1016/j.msea.2021.141064
N.D. Stepanov, A.V. Kuznetsov, G.A. Salishchev, N.E. Khlebova, V.I. Pantsyrny, 2013, Evolution of microstructure and mechanical properties in Cu-14%Fe alloy during severe cold rolling, Mater. Sci. Eng. A, 564, 264-72, https://doi.org/10.1016/j.msea.2012.11.121
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0