지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한양대학교 세라믹공정연구센터 Journal of Ceramic Processing Research Journal of Ceramic Processing Research 제24권 제2호
- 발행연도
- 2023.4
- 수록면
- 250 - 256 (7page)
이용수
초록· 키워드
오류제보하기
The effect of reinforcement strategy on graphene nanoparticles distribution in terms of metallurgical and mechanicalproperties of Incoloy 925 alloy friction stir welding was investigated. The friction stir welding was performed at differentwelding speeds (20-100 mm/min) and tool rotational speeds (300-500 rpm) using a tapered pin tool. The defect-free welds wereobtained at a tool rotational speed of 400 rpm, and welding speeds of 20 mm/min, 30 mm/min, and 40 mm/min, respectively.
The cross-sectional microstructure of the weld joints was characterized by SEM and EDX and revealed that graphene particleswere evenly distributed inside the nugget zone. Results achieved through Raman spectrometry analysis confirmed the presenceof graphene. Because graphene was distributed consistently across the nugget zone, the microhardness of the material hasgrown to around 320 HV. In comparison to the base metal, the microhardness of the graphene-reinforced Incoloy 925 stir zonewas found to be 51 percent higher. Compared to the base metal, the friction stir weld joints exhibited a high joint efficiency(ranging from 90% to 97.5%).
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Heat Transfer Simulation and Effect of Tool Pin Profile and Rotational Speed on Mechanical Properties of Friction Stir Welded AA5083-O
대한용접·접합학회지
2017 .06
-
Influence of the Welding Speeds and Changing the Tool Pin Profiles on the Friction Stir Welded AA5083-O Joints
대한용접·접합학회지
2017 .06
-
T-Joining of AA6063 extrusion plates by Friction Stir Welding
대한용접학회 특별강연 및 학술발표대회 개요집
2020 .11
-
Investigation of mechanical and metallurgical behaviour in FSW of AA5052-H32 and AA5083-H111 aluminium alloys
Journal of Ceramic Processing Research
2021 .12
-
Production and characterization of mechanical and microstructural behaviour of friction stir welded Al6063 composites reinforced with Gr/B4C/SiC particles
Journal of Ceramic Processing Research
2018 .02
-
Optimization and analysis of microstructural friction stir welded AA5083 grade aluminium alloy
Journal of Ceramic Processing Research
2021 .12
-
Recent Advances in Friction-stir Welding Process and Microstructural Investigation of Friction Stir Welded Pure Titanium
대한용접·접합학회지
2017 .08
-
실험계획법에 의한 Al5052 알루미늄 합금의 마찰교반용접특성
동력시스템공학회지
2015 .08
-
Post-weld heat treatment on friction stir welded AA6061-T6: microstructure and mechanical properties
한국소성가공학회 학술대회 논문집
2024 .10
-
Investigation on the Effects of Welding Speed on Bobbin Tool Friction Stir Welding of 2219 Aluminum Alloy
Metals and Materials International
2020 .01
-
열탄소성 해석을 이용한 전기차 배터리 하우징 마찰교반용접에 관한 연구
한국기계기술학회지
2020 .01
-
High Speed Friction Stir Welding of 5182-H111 Alloy: Temperature and Microstructural Insights into Deformation Mechanisms
Metals and Materials International
2021 .01
-
AZ31와 AZ61 마그네슘 합금의 이종 마찰교반용접 특성
한국기계가공학회지
2017 .10
-
마찰교반 용접조건에 따른 Al 5052 알루미늄 합금의 접합특성
동력시스템공학회지
2016 .06
-
Thermal-induced Residual Stresses and Distortions in Friction Stir Welds - A Literature Review
대한용접·접합학회지
2021 .08
-
순수 타이타늄의 기계적 특성에 미치는 마찰 교반 용접 공정 조건의 영향
열처리공학회지
2019 .01
-
고주파스핀들을 이용한 박판 알루미늄합금소재(Al5052-H32)의 마찰교반접합에 의한 용접성 평가
한국기계가공학회지
2017 .02
-
Study on Microstructure and Mechanical Properties of Friction Stir Welded T-joints of AA6063 extrusion plates
대한용접학회 특별강연 및 학술발표대회 개요집
2021 .05
-
Effect of Friction Stir Welding Parameters on Microstructure Development and Mechanical Properties of Aluminum Alloy Joints
대한용접학회 특별강연 및 학술발표대회 개요집
2023 .10
-
알루미늄 3003 합금의 마찰교반접합특성에 용접조건의 영향
동력시스템공학회지
2022 .06
이 논문의 저자 정보
최근 본 자료
댓글(0)
0