지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한양대학교 세라믹공정연구센터 Journal of Ceramic Processing Research Journal of Ceramic Processing Research 제22권 제6호
- 발행연도
- 2021.12
- 수록면
- 697 - 704 (8page)
이용수
초록· 키워드
오류제보하기
The present work is the novel approach to optimize the friction stir welding process of aluminium AA5083 alloy by utilizingTaguchi L9 orthogonal array technique. The present work also investigated the mechanical and metallurgical characteristicsof the weld joint. The present work involved three input friction stir welding parameters that were varied in the investigationunder the Taguchi L9 orthogonal array experimental methodology. The experimental methodology was utilized to predict theoptimal input parameters to obtain peak tensile strength and hardness values of the welded joint and the signal to noise (S/N) ratio and results of the Analysis of variance (ANOVA) were also investigated. The optimal tool rotational speed, weldingspeed and tool tilt angle were 560 rpm, 60 mm/minute and 1 degree respectively for the peak joint tensile strength and 560rpm, 80 mm/minute and 1 degree for peak joint hardness. The results from ANOVA indicated that the highest influencinginput factor of the weld joint was tool tilt angle followed by the welding speed and tool rotational speed. Metallurgical analysisof the joint revealed fine grain structure within the stir zone which directly resulted in the enhancement of the weld jointproperties.
목차
등록된 정보가 없습니다.
참고문헌 (28)
참고문헌 신청
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Optimization of Friction Stir Welding Parameters of AA2014-T6 Alloy using Taguchi Statistical Approach
대한용접·접합학회지
2020 .10
-
Investigation of mechanical and metallurgical behaviour in FSW of AA5052-H32 and AA5083-H111 aluminium alloys
Journal of Ceramic Processing Research
2021 .12
-
Heat Transfer Simulation and Effect of Tool Pin Profile and Rotational Speed on Mechanical Properties of Friction Stir Welded AA5083-O
대한용접·접합학회지
2017 .06
-
Influence of Workpiece Tilting Angle on Joint Properties in Tailor Friction Stir Welded Blanks of Aluminium Alloy 5052-H32
대한용접·접합학회지
2018 .10
-
Influence of the Welding Speeds and Changing the Tool Pin Profiles on the Friction Stir Welded AA5083-O Joints
대한용접·접합학회지
2017 .06
-
Friction Stir Welding Tool Geometries Affecting Tensile Strength of AA6063-T1 Aluminum Alloy Butt Joint
International journal of advanced smart convergence
2015 .01
-
Study on Microstructure and Mechanical Properties of Friction Stir Welded T-joints of AA6063 extrusion plates
대한용접학회 특별강연 및 학술발표대회 개요집
2021 .05
-
마찰교반 용접조건에 따른 Al 5052 알루미늄 합금의 접합특성
동력시스템공학회지
2016 .06
-
알루미늄 3003 합금의 마찰교반접합특성에 용접조건의 영향
동력시스템공학회지
2022 .06
-
Optimization of process parameters in friction stir welding of aluminium matrix SiC-Al2O3 composites by genetic algorithm
Journal of Ceramic Processing Research
2020 .01
-
T-Joining of AA6063 extrusion plates by Friction Stir Welding
대한용접학회 특별강연 및 학술발표대회 개요집
2020 .11
-
Investigation on the Effects of Welding Speed on Bobbin Tool Friction Stir Welding of 2219 Aluminum Alloy
Metals and Materials International
2020 .01
-
Characterization of AA6061-ZrO2-C friction stir welded composite joints
Journal of Ceramic Processing Research
2020 .01
-
마찰교반접합의 공정변수가 AA2219-AA2195 이종 알루미늄 접합에 미치는 영향
한국재료학회지
2017 .01
-
Evaluating the Welding Pulses of Various Tool Profiles in Single-Pass Friction Stir Welding of 6082-T6 Aluminium Alloy
대한용접·접합학회지
2021 .06
-
Post-weld heat treatment on friction stir welded AA6061-T6: microstructure and mechanical properties
한국소성가공학회 학술대회 논문집
2024 .10
-
Recent Advances in Friction-stir Welding Process and Microstructural Investigation of Friction Stir Welded Pure Titanium
대한용접·접합학회지
2017 .08
-
Microstructure and mechanical behaviour of graphene reinforced friction stir welded joint of nickel-based superalloy Incoloy 925
Journal of Ceramic Processing Research
2023 .04
-
Mg Alloy(AZ61) 마찰교반용접 조건에 따른 용접부의 온도와 기계적 특성변화
한국생산제조학회지
2017 .08
-
Production and characterization of mechanical and microstructural behaviour of friction stir welded Al6063 composites reinforced with Gr/B4C/SiC particles
Journal of Ceramic Processing Research
2018 .02
이 논문의 저자 정보
최근 본 자료
댓글(0)
0