메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김나경 (충북대학교) 김소은 (충북대학교) 임도연 (안동대학교) 홍승미 (충북대학교) 안태창 (안동대학교) 김건휘 (충북대학교)
저널정보
Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Vol.40 No.10
발행연도
2023.10
수록면
813 - 819 (7page)
DOI
10.7736/JKSPE.023.075

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
With the increasing interest in research on the development of next-generation technologies such as flexible smartphones, displays, and wearable devices, interest in the development of materials and processes for transparent electrodes constituting them is also increasing. The most widely used material for manufacturing transparent devices is indium tin oxide (ITO). However, ITO is scarce, expensive, and brittle, making it is essential to replace it with new materials. In this study, we successfully fabricated a transparent electrode by electrospinning polyvinylpyrrolidone (PVP) and copper electroless deposition on the polyimide film. Especially, this study suggests a new combined heat treatment that uses both the hot plate and the convection oven. Through the combined heat treatment, the junctions between the nanofibers overlapped removed consequently reducing contact resistance. The mechanical stability of the fabricated electrode was evaluated by using a highly repeated bending test. Also, through the tape-peeling test, we confirmed that the adhesive strength of the electrode was high. This method can be applied to various polymer-based, substrate which are vulnerable to annealing process.

목차

1. 서론
2. 실험 재료 및 실험 과정
3. 실험 결과 및 분석
4. 결론
REFERENCES

참고문헌 (21)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-151-24-02-088067327