지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Vol.40 No.9
- 발행연도
- 2023.9
- 수록면
- 733 - 739 (7page)
- DOI
- 10.7736/JKSPE.023.058
이용수
초록· 키워드
오류제보하기
Condensation is an important research topic that ensures increased energy efficiency. Our researchers aimed to optimize heat transfer in industrial heat exchanger tubes through surface modification. We first succeeded in fabricating superhydrophilic and superhydrophobic tubes using surface modification. We observed the condensation phenomenon on the outside of the tube and evaluated the heat transfer performance through a condensation experimental facility. As a result, we found that the condensation heat transfer efficiency of superhydrophobic tubes is superior to that of conventional tubes. However, the heat transfer efficiency of the superhydrophobic tube reduced with an increase in saturation. To improve performance degradation, superhydrophilic and superhydrophobic hybrid tubes were fabricated and evaluated for their potential to improve heat transfer efficiency. As a result, we found that the liquid film generated by filmwise condensation on the superhydrophilic surface swept past the residual droplets generated by dropwise condensation on the superhydrophobic surface, resulting in the best heat transfer performance. Our results break the stereotypes of previous studies and provide a new paradigm for achieving optimal heat transfer performance on large-area curved surfaces. This research is expected to be widely applied in a variety of industries where energy efficiency is critical.
목차
1. 서론
2. 응축 열전달 성능 평가 실험
3. 표면 개질 및 특성 분석
4. 응축 실험 결과 및 열전달 효율 해석
5. 결론
REFERENCES
참고문헌 (27)
참고문헌 신청
Lo, C.-W., Chu, Y.-C., Yen, M.-H., Lu, M.-C., (2019), Enhancing condensation heat transfer on three-dimensional hybrid surfaces, Joule, 3(11), 2806-2823.
Tanasawa, I., (1991), Advances in condensation heat transfer, Advances in Heat Transfer, Elsevier, 55-139.
Rose, J., (1998), Condensation heat transfer fundamentals, Chemical Engineering Research and Design, 76(2), 143-152.
Yan, Y.-Y., Lin, T.-F., (1999), Condensation heat transfer and pressure drop of refrigerant R-134a in a small pipe, International journal of heat and mass transfer, 42(4), 697-708.
Chen, W., Hui, K., Wang, B., Zhao, Q., Chong, D., Yan, J., (2021), Review of the tube external condensation heat transfer characteristic of the passive containment cooling system in nuclear power plant, Annals of Nuclear Energy, 157, 108226.
Tanasawa, I., (1991), Advances in condensation heat transfer, Advances in Heat Transfer, Elsevier, 55-139.
Rose, J., (1998), Condensation heat transfer fundamentals, Chemical Engineering Research and Design, 76(2), 143-152.
Yan, Y.-Y., Lin, T.-F., (1999), Condensation heat transfer and pressure drop of refrigerant R-134a in a small pipe, International journal of heat and mass transfer, 42(4), 697-708.
Chen, W., Hui, K., Wang, B., Zhao, Q., Chong, D., Yan, J., (2021), Review of the tube external condensation heat transfer characteristic of the passive containment cooling system in nuclear power plant, Annals of Nuclear Energy, 157, 108226.
이 논문의 저자 정보
이 논문과 함께 이용한 논문
Bonding Characteristics of Solder and Sinter Joints on Active-Metal-Brazing Substrates with Nano Sputtered Ag-Cu-Ti Brazing Filler Metal
Mi-Song Kim
,
Won Sik Hong
,
Yong-Mo Kim
대한용접·접합학회지
2023
.12
Examination of sulfate resistance of nano‑alumina added ordinary Portland cement paste, focusing on the two different crystallinity of nano‑aluminas
Juan Yu
,
Sungwon Sim
,
Haemin Song
외 5명
International Journal of Concrete Structures and Materials
2023
.09
차량용 램프 내열 온도 예측을 위한 CFD 해석 및 알고리즘 개발
서성원
,
김영완
,
이권영
한국자동차공학회논문집
2023
.07
Predicting heat transfer performance in a complex heat exchanger for LNG FGSS development
Jae Won Heo
,
Yoon Hwan Choi
,
Sung Hun Kim
외 4명
Journal of Advanced Marine Engineering and Technology (JAMET)
2023
.04
Experimental Study on Heat Transfer Performance of Microchannel Applied with Manifold
김정명
,
장호용
,
박희성
Journal of the Korean Society for Precision Engineering
2022
.12
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0102-2023-555-002004677