메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
이문수 ((주)에이스티어 광양사업소) 손수지 (㈜에이스티어 광양사무소) 원대희 (원광대학교 산학협력단)
저널정보
한국기계기술학회 한국기계기술학회지 한국기계기술학회지 제23권 제6호
발행연도
2021.12
수록면
1,037 - 1,042 (6page)
DOI
10.17958/ksmt.23.6.202112.1037

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
This study was to develop a piston rod made of SiC by applying a sintering treatment after press molding in order to replace the imported piston rod used in the past. As a result of evaluating the mechanical properties of the developed piston rod, the following conclusions were obtained. The surface roughness value of the piston rod made of silicon carbide was 0.950Ra, and the surface Vickers hardness value was 19.94GPa. As a result of XRD analysis of the surface of the prototype piston rod, the main crystalline phase was 6H-SiC, and the crystalline phases of 4H-SiC and α-SiC were existed. In addition, a trace amount of SiC was detected. As a result of SEM observation of the piston rod surface of the prototype, a number of large porosity were observed. As a result of measuring the surface hardness of the piston rod made of SiC, it showed 70% of the physical properties compared to imported products.

목차

등록된 정보가 없습니다.

참고문헌 (12)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0