지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한양대학교 세라믹공정연구센터 Journal of Ceramic Processing Research Journal of Ceramic Processing Research 제22권 제6호
- 발행연도
- 2021.12
- 수록면
- 629 - 635 (7page)
이용수
초록· 키워드
오류제보하기
Aluminium SiC composites are promising in frictional and breaking material applications because of its tribological properties.
The current work concentrates on optimization of stir casting parameters such as stirring speed, pouring temperature andstirrer blade design, and their outcome on mechanical behaviour of Al/SiC composite prepared by stir casting. Theoptimization technique used is Taguchi grey relational analysis. A Taguchi L9 orthogonal array was designed and experimentswere conducted based on the designed parameters. The ultimate tensile strength and hardness values were tested for everycomposite. Derived on the average outputs evaluated from Taguchi optimized Grey Relational Analysis, a stirring speed of 700RPM, pouring temperature at 670 ºC and alternate stirring blade design were predicted to be the optimized factors. AnAnalysis of Variance was performed to recognize the controlling factors. The pouring temperature was identified to hold theleading major control of 75.19% on the mechanical properties of the composite. Confirmation test carried with the optimalfactors identified an enhancement of 52.85% in Grey Relational Grade. Microstructure examination of Al/SiC composite ofthe confirmation trial exhibited SiC particle reinforcement in the Al matrix.
목차
등록된 정보가 없습니다.
참고문헌 (20)
참고문헌 신청
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Study on Mechanical Properties of AMCs produced by Stir Casting Method
한국기계가공학회 춘추계학술대회 논문집
2016 .10
-
Optimization of process parameters in friction stir welding of aluminium matrix SiC-Al2O3 composites by genetic algorithm
Journal of Ceramic Processing Research
2020 .01
-
Production and characterization of mechanical and microstructural behaviour of friction stir welded Al6063 composites reinforced with Gr/B4C/SiC particles
Journal of Ceramic Processing Research
2018 .02
-
Investigation on the Effect of Stirring Process Parameters on the Dispersion of SiC Particles Inside Melting Crucible
Metals and Materials International
2021 .01
-
Utilization of ANN for the Prediction of Mechanical Properties in AlP0507-MWCNT-RHA Composites
Metals and Materials International
2024 .04
-
Optimization of Process Parameters using Design of Experiments in Friction Stir Spot Welding of Al6061-T6
한국소성가공학회 학술대회 논문집
2016 .10
-
Optimization of stir casting process parameter using response surface meth odology
Journal of Ceramic Processing Research
2022 .04
-
50/60 계열 이종 Al 합금의 맞대기 마이크로 마찰교반접합에서 SiC 강화제를 첨가한 용접성 평가
한국정밀공학회 학술발표대회 논문집
2022 .05
-
Optimization of Friction Stir Welding Parameters of AA2014-T6 Alloy using Taguchi Statistical Approach
대한용접·접합학회지
2020 .10
-
핵융합로 디버터 대면재의 W 접합부 미세조직과 마이크로경도 측정
대한기계학회 논문집 A권
2017 .12
-
SiC나노분말을 첨가한 이종알루미늄 마이크로 맞대기 마찰교반용접 특성
한국기계가공학회 춘추계학술대회 논문집
2021 .06
-
Study on effect of welding speed on friction stir welded aluminium metal matrix hybrid composite
Journal of Ceramic Processing Research
2021 .10
-
Analysis of Effect of Stirring Process Conditions on Liquid Viscosity in an Overhead Stirrer
Journal of the Korean Society for Precision Engineering
2020 .09
-
Optimization of friction stir welding process parameters on AA 6063-SiC-B4C hybrid metal matrix composites by genetic algorithm
Journal of Ceramic Processing Research
2021 .01
-
Al 5083의 마찰교반용접 공정에 관한 연구
한국기계가공학회 춘추계학술대회 논문집
2020 .11
-
SiC/SiC 복합재료의 피로거동
대한기계학회 춘추학술대회
2015 .04
-
고순도 SiC 파우더를 이용한 반절연 SiC 단결정 성장
전기전자재료학회논문지
2019 .01
-
Cool SiC™ (SiC Mosfet)의 특징과 응용
전력전자학회지
2019 .04
-
대전방지용 Al2O3-SiC 복합세라믹 소결체의 제조 및 특성
한국분말야금학회지
2018 .01
-
효과적 교반을 위한 자석 스터링바 프린팅
한국기계가공학회 춘추계학술대회 논문집
2018 .04
이 논문의 저자 정보
최근 본 자료
댓글(0)
0