메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Morteza Tayebi (Islamic Azad University) Hamidreza Najafi (Islamic Azad University) Said Nategh (Islamic Azad University) Alireza Khodabandeh (Islamic Azad University)
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.27 No.10
발행연도
2021.10
수록면
3,905 - 3,917 (13page)
DOI
10.1007/s12540-020-00877-5

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Creep properties of ZK60 alloy and ZK60/SiCw composite have been investigated after extrusion and precipitation hardeningby accelerated creep test. Creep tests were conducted at 150 °C in the stress range of 10?120 MPa. At low stresses, the stressexponents of 1.93 and 1.75 were obtained for the unreinforced alloy and the composite, respectively. Stress exponents of theunreinforced alloy and composite sample were 5.82 and 7.07, respectively, at high stresses. The creep mechanism changedby increasing the stress from grain boundary sliding (GBS) to dislocation creep due to the fact that the average true creepactivation energy changed from 55 to 95.06 kJ/mol. Based on the microstructural observations, at low stresses, the grainrefinement induced by twinning caused the GBS mechanism. However, at high stresses, slip changed from basal planes tothe pyramidal secondary slip system which was associated with increase in twin density. Examination of the fracture surfacesrevealed that cavity nucleation in the grain corners and around the precipitates was the main reason for creep failure.

목차

등록된 정보가 없습니다.

참고문헌 (48)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0