지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.43 No.3
- 발행연도
- 2022.5
- 수록면
- 293 - 309 (17page)
이용수
초록· 키워드
오류제보하기
Accurate design models for predicting the shear resistance of headed studs in solid concrete slabs are essential for obtaining economical and safe steel-concrete composite structures. In this study, symbolic regression with genetic programming (GPSR) was applied to experimental data to formulate new descriptive equations for predicting the shear resistance of studs in solid slabs using both normal and lightweight concrete. The obtained GPSR-based nominal resistance equations demonstrated good agreement with the test results. The equations indicate that the stud shear resistance is insensitive to the secant modulus of elasticity of concrete, which has been included in many international standards following the pioneering work of Ollgaard et al.
In contrast, it increases when the stud height-to-diameter ratio increases, which is not reflected by the design models in the current international standards. The nominal resistance equations were subsequently refined for use in design from reliability analyses to ensure that the target reliability index required by the Eurocodes was achieved. Resistance factors for the developed equations were also determined following US design practice. The stud shear resistance predicted by the proposed models was compared with the predictions from 13 existing models. The accuracy of the developed models exceeds the accuracy of the existing equations. The proposed models produce predictions that can be used with confidence in design, while providing significantly higher stud resistances for certain combinations of variables than those computed with the existing equations given by many standards
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Review of stud shear resistance prediction in steel-concrete composite beams
Steel and Composite Structures, An International Journal
2018 .01
-
Experimental and numerical study on static behavior of grouped large-headed studs embedded in UHPC
Steel and Composite Structures, An International Journal
2020 .01
-
Experimental studies on the behaviour of headed shear studs for composite beams in fire
Steel and Composite Structures, An International Journal
2019 .01
-
Push-out tests on stud shear connectors with constrained structure of steel-concrete composite beams
Structural Engineering and Mechanics, An Int＇l Journal
2022 .09
-
Bond-slip effect in steel-concrete composite flexural members: Part 2 ‒ Improvement of shear stud spacing in SCP
Steel and Composite Structures, An International Journal
2019 .01
-
Study on uplift performance of stud connector in steel-concrete composite structures
Steel and Composite Structures, An International Journal
2015 .01
-
Analytical performance evaluation of modified inclined studs for steel plate concrete wall subjected to cyclic loads
Computers and Concrete, An International Journal
2016 .01
-
Shear capacity of stud shear connectors with initial damage: Experiment, FEM model and theoretical formulation
Steel and Composite Structures, An International Journal
2017 .01
-
Shear stiffness of headed studs on structural behaviors of steel-concrete composite girders
Steel and Composite Structures, An International Journal
2020 .01
-
Experimental study on the hybrid shear connection using headed studs and steel plates
Steel and Composite Structures, An International Journal
2020 .01
-
Reliability Evaluations for Shear Strength of Resistance Welded Ball Stud according to Different Cooling Methods
동력시스템공학회지
2018 .12
-
Elastic stiffness of stud connection in composite structures
Steel and Composite Structures, An International Journal
2021 .01
-
Experimental and numerical studies on the shear connectors in steel-concrete composite beams at fire and post fire exposures
Steel and Composite Structures, An International Journal
2021 .01
-
FE validation of the equivalent diameter calculation model for grouped headed studs
Steel and Composite Structures, An International Journal
2018 .01
-
Design models for predicting the resistance of headed studs in profiled sheeting
Steel and Composite Structures, An International Journal
2022 .03
-
Research on Whole‑Process Tensile Behavior of Headed Studs in Steel–Concrete Composite Structures
International Journal of Concrete Structures and Materials
2021 .07
-
C-스터드 이격용 클립을 적용한 석고보드 건식벽체 시스템의 단열 및 구조성능 평가
KIEAE Journal
2022 .04
-
냉각 방법에 따른 볼스터드의 전단강도
대한기계학회 춘추학술대회
2017 .11
-
전단연결재의 내화성능에 대한 유한요소해석
공학기술논문지
2018 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0