지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.42 No.5
- 발행연도
- 2022.3
- 수록면
- 633 - 647 (15page)
이용수
초록· 키워드
오류제보하기
This paper presents the results from reliability analyses of the current Eurocode 4 (EN 1994-1-1) and AISC 360-16 design models for predicting the resistance of headed stud shear connectors within profiled steel sheeting, when the ribs are oriented transverse to the supporting beam. For comparison purposes, the performance of the alternative “Luxembourg” and “Stuttgart” model were also considered. From an initial database of 611 push-out tests, 269 cases were included in the study, which ensured that the results were valid over a wide range of geometrical and material properties. It was found that the current EN 1994-1-1 design rules deliver a corrected partial safety factor γM * of around 2.0, which is significantly higher than the target value 1.25. Moreover, 179 tests fell within the domain of the concrete-related failure design equation. Notwithstanding this, the EN 1994-1-1 equations provide satisfactory results for re-entrant profiled sheeting. The AISC 360-16 design equation for steel failure covers 263 of the tests in the database and delivers γM *?2.0. Conversely, whilst the alternative “Stuttgart” model provides an improvement over the current codes, only a corrected partial safety factor of γM *=1.47 is achieved. Finally, the alternative “Luxembourg” design model was found to deliver the required target value, with a corrected partial safety factor γM * between 1.21 and 1.28. Given the fact that the Luxembourg design model is the only model that achieved the target values required by EN 1990, it is recommended as a potential candidate for inclusion within the second generation of Eurocodes.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Design models for predicting shear resistance of studs in solid concrete slabs based on symbolic regression with genetic programming
Steel and Composite Structures, An International Journal
2022 .05
-
Review of stud shear resistance prediction in steel-concrete composite beams
Steel and Composite Structures, An International Journal
2018 .01
-
Experimental and numerical study on static behavior of grouped large-headed studs embedded in UHPC
Steel and Composite Structures, An International Journal
2020 .01
-
Bond-slip effect in steel-concrete composite flexural members: Part 2 ‒ Improvement of shear stud spacing in SCP
Steel and Composite Structures, An International Journal
2019 .01
-
Shear stiffness of headed studs on structural behaviors of steel-concrete composite girders
Steel and Composite Structures, An International Journal
2020 .01
-
FE validation of the equivalent diameter calculation model for grouped headed studs
Steel and Composite Structures, An International Journal
2018 .01
-
Research on Whole‑Process Tensile Behavior of Headed Studs in Steel–Concrete Composite Structures
International Journal of Concrete Structures and Materials
2021 .07
-
Push-out tests on stud shear connectors with constrained structure of steel-concrete composite beams
Structural Engineering and Mechanics, An Int＇l Journal
2022 .09
-
Study on uplift performance of stud connector in steel-concrete composite structures
Steel and Composite Structures, An International Journal
2015 .01
-
Experimental studies on the behaviour of headed shear studs for composite beams in fire
Steel and Composite Structures, An International Journal
2019 .01
-
Analytical performance evaluation of modified inclined studs for steel plate concrete wall subjected to cyclic loads
Computers and Concrete, An International Journal
2016 .01
-
Experimental study on the hybrid shear connection using headed studs and steel plates
Steel and Composite Structures, An International Journal
2020 .01
-
Reliability Evaluations for Shear Strength of Resistance Welded Ball Stud according to Different Cooling Methods
동력시스템공학회지
2018 .12
-
Experimental and numerical studies on the shear connectors in steel-concrete composite beams at fire and post fire exposures
Steel and Composite Structures, An International Journal
2021 .01
-
Shear capacity of stud shear connectors with initial damage: Experiment, FEM model and theoretical formulation
Steel and Composite Structures, An International Journal
2017 .01
-
Elastic stiffness of stud connection in composite structures
Steel and Composite Structures, An International Journal
2021 .01
-
Review of Design Flexural Strengths of Steel–Concrete Composite Beams for Building Structures
International Journal of Concrete Structures and Materials
2016 .09
-
C-스터드 이격용 클립을 적용한 석고보드 건식벽체 시스템의 단열 및 구조성능 평가
KIEAE Journal
2022 .04
-
CD Stud 용접에 미치는 Insultation Pin 형상에 관한 연구
대한용접학회 특별강연 및 학술발표대회 개요집
2019 .11
이 논문의 저자 정보
최근 본 자료
댓글(0)
0