개인구독
소속 기관이 없으신 경우, 개인 정기구독을 하시면 저렴하게
논문을 무제한 열람 이용할 수 있어요.
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.42 No.1
- 발행연도
- 2022.1
- 수록면
- 33 - 48 (16page)
이용수
초록· 키워드
오류제보하기
This paper researches a lightweight composite structure referred to as the Profiled Steel Sheeting Dry Board (PSSDB). It is fundamentally produced by connecting a Profiled Steel Sheeting to Dry Board using mechanical screws. It is mainly employed as floor panels. However, almost all studies have focused on researching the one-way structural performance.
Therefore, this study focuses on the bending behaviour of the two-way PSSDB floor system using both of Finite Element (FE) and Experimental analysis. Four panels were used in the experimental tests, and a mild steel plate has been applied at the bottom for two panels. For the FE process, models were created using ABAQUS software. 4 parametric studies have been utilized to understand the system’s influential elements. From the experimental tests, it was found that using Steel Plate shall optimize the two-way action of the system and depending on the type of dry board the improvement in stiffness may reach up to 38%. It was shown from the FE analysis that the dry board, profiled steel sheeting and steel plat can affect the system by up to 10 %, 17% and 3% respectively, while applying a uniform load demonstrate a better two-way action.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Use and Application of High-Performance Steels for Steel Structures
한국강구조학회지
2017 .04
-
New Corrosion-Resistant Zn-Al-Mg Alloy Hot-Dip Galvanized Steel Sheet
Corrosion Science and Technology
2024 .04
-
Finite element study on composite slab-beam systems under various fire exposures
Steel and Composite Structures, An International Journal
2020 .01
-
Experimental Determination of Fracture Property for Ultra-High Strength Steel Sheet
한국소성가공학회 학술대회 논문집
2020 .06
-
모듈러 건식 바닥구조용 원형강관 강판패널의 구조성능 실험
한국강구조학회 학술대회 발표집
2021 .06
-
고장력 강판 소재의 드로잉 성형해석
한국생산제조학회 학술발표대회 논문집
2021 .12
-
유도가열을 이용한 컬러강판의 잉크 건조 특성 비교
한국기계가공학회 춘추계학술대회 논문집
2017 .10
-
Characterization of fracture behavior of automotive steel sheets
한국소성가공학회 학술대회 논문집
2022 .12
-
철선일체형 데크플레이트 바닥구조의 휨성능
한국강구조학회 학술대회 발표집
2021 .06
-
Vibration analysis and FE model updating of lightweight steel floors in full-scale prefabricated building
Structural engineering and mechanics : An international journal
2016 .01
-
Fire Resistance Studies on High Strength Steel Structures
International journal of high-rise buildings
2018 .01
-
Numerical investigation on the behavior of SHS steel frames strengthened using CFRP
Steel and Composite Structures, An International Journal
2017 .01
-
A Study on the Friction Variation of Galvanized Steel in Automotive Application for Formability Prediction
한국자동차공학회 춘계학술대회
2021 .06
-
제진 Al5052 판재와 고강도 Steel의 기계적 체결 방법에 따른 접합성 평가
대한용접학회 특별강연 및 학술발표대회 개요집
2020 .11
-
Nonlinear finite element modeling of steel-sheathed cold-formed steel shear walls
Steel and Composite Structures, An International Journal
2016 .01
-
Compressive behavior of profiled double skin composite wall
Steel and Composite Structures, An International Journal
2019 .01
-
Experimental and numerical investigation of strengthened deficient steel SHS columns under axial compressive loads
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
Experimental and numerical investigation of strengthened deficient steel SHS columns under axial compressive loads
Structural engineering and mechanics : An international journal
2018 .01
-
Strengthening of steel-concrete composite beams with composite slab
Steel and Composite Structures, An International Journal
2020 .01
-
980MPa 고강도 냉연 강판의 물성 평가 및 성형성 연구
한국정밀공학회 학술발표대회 논문집
2016 .05
이 논문의 저자 정보
최근 본 자료
댓글(0)
0