지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.22 No.1
- 발행연도
- 2016.1
- 수록면
- 79 - 89 (11page)
이용수
초록· 키워드
오류제보하기
Cold formed steel shear panel is one of the main components to bearing lateral load in low and mid-rise cold formed steel structures. This paper uses finite element analysis to evaluate the stiffness, strength and failure mode at cold formed steel shear panels whit steel sheathing and nonlinear connections that are under monotonic loading. Two finite element models based on two experimental model whit different failure modes is constructed and verified. It includes analytical studies that investigate the effects of studs and steel sheathing thickness changes, fasteners spacing at panel edges, one or two sides steel sheathing and height-width ratio of wall on the lateral load capacity. Dominant failure modes include buckling of steel sheet, local buckling in boundary studs and sheet unzipping in the bottom half of the wall.
목차
등록된 정보가 없습니다.
참고문헌 (15)
참고문헌 신청
AISI Lateral Standard / 2004 / AISI Standard for Cold-Formed Steel Framing; (Lateral Design 2004 Edition) / American Iron and Steel Institute
M. Anbarasu / 2013 / Study on the effect of ties in the intermediate length Cold Formed Steel (CFS) columns / Structural Engineering and Mechanics, An Int＇l Journal 46(3):323~335
Balh, N. / 2010 / Development of seismic design provisions for steel sheathed shear walls
Miroslav Beševic / 2012 / Experimental investigation of residual stresses in cold formed steel sections / Steel and Composite Structures, An International Journal 12(6):465~489
Esmaeili Niari, S. / 2012 / Numerical methods finite element analysis of steel sheathed cold-formed steel shear walls / Proceedings of the 15th World Conference on Earthquake Engineering (15WCEE)
M. Anbarasu / 2013 / Study on the effect of ties in the intermediate length Cold Formed Steel (CFS) columns / Structural Engineering and Mechanics, An Int＇l Journal 46(3):323~335
Balh, N. / 2010 / Development of seismic design provisions for steel sheathed shear walls
Miroslav Beševic / 2012 / Experimental investigation of residual stresses in cold formed steel sections / Steel and Composite Structures, An International Journal 12(6):465~489
Esmaeili Niari, S. / 2012 / Numerical methods finite element analysis of steel sheathed cold-formed steel shear walls / Proceedings of the 15th World Conference on Earthquake Engineering (15WCEE)
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Use and Application of High-Performance Steels for Steel Structures
한국강구조학회지
2017 .04
-
Fire Resistance Studies on High Strength Steel Structures
International journal of high-rise buildings
2018 .01
-
Comparison of structural foam sheathing and oriented strand board panels of shear walls under lateral load
Advances in computational design
2019 .01
-
Structural Shear Wall Systems with Metal Energy Dissipation Mechanism
International journal of high-rise buildings
2016 .01
-
Investigation of design values computation of wood shear walls constructed with structural foam sheathing
Advances in computational design
2019 .01
-
Nonlinear behavior of connections in RCS frames with bracing and steel plate shear wall
Steel and Composite Structures, An International Journal
2016 .01
-
The multi-axial strength performance of composite structural B-C-W members subjected to shear forces
Steel and Composite Structures, An International Journal
2018 .01
-
Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings
Steel and Composite Structures, An International Journal
2019 .01
-
Finite element modelling of back-to-back built-up cold-formed stainless-steel lipped channels under axial compression
Steel and Composite Structures, An International Journal
2019 .01
-
Study on the flexural behavior of corroded built-up cold-formed thin-walled steel beams
Steel and Composite Structures, An International Journal
2020 .01
-
절곡 강판(Cap)을 전단연결재로 사용한 강판-콘크리트 합성보의 휨강도 분석
한국산학기술학회 논문지
2018 .07
-
Experimental study on cold-formed lipped channel stub columns reinforced by steel bars or steel strips
Steel and Composite Structures, An International Journal
2021 .01
-
Investigation of performance of steel plate shear walls with partial plate-column connection (SPSW-PC)
Steel and Composite Structures, An International Journal
2021 .01
-
Bond-slip effect in steel-concrete composite flexural members: Part 2 ‒ Improvement of shear stud spacing in SCP
Steel and Composite Structures, An International Journal
2019 .01
-
Fundamental period estimation of steel frames equipped with steel panel walls
Structural Engineering and Mechanics, An Int＇l Journal
2021 .01
-
Research on cold-formed steel connections: A state-of-the-art review
Steel and Composite Structures, An International Journal
2016 .01
-
얕은 파형강판의 전단이력거동에 관한 실험적 분석
대한건축학회 논문집 - 구조계
2015 .10
-
Modelling Steel and Composite Structures(2017)
한국강구조학회지
2018 .02
-
Damage and stiffness research on steel shape steel fiber reinforced concrete composite beams
Computers and Concrete, An International Journal
2019 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0