지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2022.11
- 수록면
- 2,646 - 2,651 (6page)
- DOI
- 10.1007/s12540-022-01173-0
이용수
초록· 키워드
오류제보하기
In this study after designing and manufacturing HPT’s anvils, copper disks with more than 99.99% purity were processedby HPT at two selected pressures for various turns. The results showed that the softening of Cu processed disks occurs veryquickly. Also, the softening range expanded from near the edge to near the center of processed disks, and this range was moreexpanded by increasing turns and pressure. The uniformity of hardness along the radius of the processed disk was obtainedat a pressure of 1.25 GPa for 2 turns. Microhardness-equivalent strain plots showed a maximum pick at the strain of 2–3 andthen it reached a steady-state at the equivalent strain of 5–6. Mean crystallite size and dislocation density were calculatedusing the Rietveld refinement method from XRD patterns. The results illustrated mean crystallite size and dislocation densitydue to recrystallization and recovery decreased by increasing pressure and turn. These results could help long-time applicationsof copper processed by SPD processes that are unusable due to long-time softening.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
유한요소해석을 이용한 고압비틀림 공정 중의 구리 분말의 치밀화및 고형화 거동 분석
한국분말야금학회지
2015 .01
-
Localized failure in damage dynamics
Coupled systems mechanics
2015 .01
-
Thickness Inhomogeneity in Hardness and Microstructure of Copper After the Compressive Stage in High-Pressure Torsion
Metals and Materials International
2015 .01
-
Combined hardening and localized failure with softening plasticity in dynamics
Coupled systems mechanics
2015 .01
-
원관 내의 디스크를 지나는 축대칭 스톡스 유동
한국전산유체공학회지
2016 .12
-
Large Deformation Behavior of Twin-Induced Plasticity Steels Under High-Pressure Torsion
Metals and Materials International
2016 .01
-
Strain-hardening and Softening of Polymer Melts and its Application
한국고분자학회 학술대회 연구논문 초록집
2016 .10
-
Strengthening Effect of Decreased Dislocation Density After Annealing in Pure Aluminum or Copper
Metals and Materials International
2024 .03
-
디스크 IO 요청 패킷 사본 전달을 이용한 다중 디스크 IO 방법
Proceedings of KIIT Conference
2020 .10
-
스프링백 저감을 위한 초고강도강의 국부적 연화 열처리에 따른 미세조직과 기계적 특성 변화에 관한 연구
소성·가공
2021 .06
-
A simple approach to the elasto-plastic coupling analyses of circular tunnels in confining pressure-dependent strain-softening rock masses
Geosystem Engineering
2017 .01
-
Investigating thermo-mechanical stresses in functionally graded disks using Navier’s method for different loading conditions
Structural Engineering and Mechanics, An Int＇l Journal
2024 .09
-
디스크 브레이크 성능 향상을 위한 타공 배치에 관한 최적설계
한국자동차공학회 추계학술대회 및 전시회
2020 .11
-
Rate of softening and sensitivity for weakly cemented sensitive clays
Geomechanics & engineering
2016 .01
-
Full Disk Encryption 환경에서 디지털 증거 수집 절차에 관한 연구
정보보호학회논문지
2015 .02
-
Effects of Previous Electrochemical and Chemical Corrosions on Surface Layer Softening During Electrochemical Cold Drawing of Q235 Bar
Metals and Materials International
2021 .12
-
베타 컴플렉스를 이용한 평면에서 원들의 빈 공간 분석법
한국CDE학회 논문집
2019 .09
-
The ground response curve of underwater tunnels, excavated in a strain-softening rock mass
Geomechanics & engineering
2015 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0