지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2022.9
- 수록면
- 2,239 - 2,251 (13page)
- DOI
- 10.1007/s12540-021-01121-4
이용수
초록· 키워드
오류제보하기
A developed version of friction stir brazing (FSB) entitled friction stir vibration brazing (FSVB) was presented to fabricatelow carbon steel joint using %67wt Sn-%33wt Pb alloy as a braze metal. This attempt aims to analyze the role of mechanicalvibration and rotational speed on microstructure and mechanical behaviors of the brazed samples. Furthermore, the thermalanalysis, the thickness of intermetallic compounds (IMCs) layers, and void volume percentage at the joint interface werestudied. It was concluded that the temperature during the joining process increased and the coherency of the joint interfaceenhanced while FSVB was applied instead of FSB. In addition, the grains in the joint zone under the FSVB process weresmaller than those produced under the conventional FSB process. The results also showed that the mechanical performance,namely hardness, and shear strength increased and the thickness of the IMCs layer along with the void volume percentagein the brazed sample decreased as rotational speed increased from 850 to 1150 rpm. The results indicated that rotationalspeeds over 1150 rpm had detrimental effects on mechanical properties. This is related to the effect of high heat input andinduced temperature on brazing flow and filler-base metal interaction.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Effects of Brazing Temperature on Microstructure and High-Temperature Strength of Joints Using a Novel Fourth-Generation Nickel-Based Single Crystal Superalloy
Metals and Materials International
2023 .02
-
최신의 고능률 브레이징 기술개발 동향
대한용접·접합학회지
2016 .04
-
알루미늄의 브레이징과 원리
마이크로전자 및 패키징학회지
2017 .01
-
Current Review on the Research Status of Cemented Carbide Brazing: Filler Materials and Mechanical Properties
Metals and Materials International
2021 .01
-
Heat Transfer Simulation and Effect of Tool Pin Profile and Rotational Speed on Mechanical Properties of Friction Stir Welded AA5083-O
대한용접·접합학회지
2017 .06
-
Recent Advances in High Entropy Alloy Fillers for Brazing Similar and Dissimilar Materials: A Review
Metals and Materials International
2024 .05
-
A Study on Temperature Control of Induction Brazing Coil
제어로봇시스템학회 국제학술대회 논문집
2015 .10
-
페라이트계 스테인리스 강의 브레이징 조건에 따른 특성 평가
대한용접학회 특별강연 및 학술발표대회 개요집
2016 .04
-
Weldability of Aluminum Alloy and Hot Dip Galvanized Steel by AC Pulse MIG Brazing
대한용접·접합학회지
2021 .04
-
Effect of Various Factors on the Brazed Joint Properties in Al Brazing Technology
대한용접·접합학회지
2016 .04
-
자동차용 아연도금강판의 브레이징 특성
대한용접학회 특별강연 및 학술발표대회 개요집
2016 .04
-
Influence of the Welding Speeds and Changing the Tool Pin Profiles on the Friction Stir Welded AA5083-O Joints
대한용접·접합학회지
2017 .06
-
Effects of Process Parameters on Friction Stir Weldability in Dissimilar Joints of AA5052 and Advanced High Strength Steel
대한용접·접합학회지
2021 .04
-
Aluminium Based Brazing Fillers for High Temperature Electronic Packaging Applications
마이크로전자 및 패키징학회지
2015 .01
-
마찰교반공정을 통한 강재의 개질 영역에서의 미세조직에 미치는 합금원소의 영향
한국재료학회지
2015 .01
-
Effect of Friction Stir Welding Parameters on Microstructure Development and Mechanical Properties of Aluminum Alloy Joints
대한용접학회 특별강연 및 학술발표대회 개요집
2023 .10
-
Prediction of IMC Thickness in Laser assisted Hybrid Friction Stir Welded joint of Dissimilar Materials(Al5052-DP590) by Numerical Analysis
대한용접학회 특별강연 및 학술발표대회 개요집
2018 .04
-
1000MPa급 DP강 MIG 아크 브레이징 접합부의 기계적 성질에 미치는 브레이징 전류의 영향
대한용접·접합학회지
2017 .04
-
Active brazing of Al2O3 to copper using dual active Ag-Cu-Sn-Zr-Ti filler
대한용접학회 특별강연 및 학술발표대회 개요집
2019 .05
-
Investigation on the Effects of Welding Speed on Bobbin Tool Friction Stir Welding of 2219 Aluminum Alloy
Metals and Materials International
2020 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0