지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2022.8
- 수록면
- 1,851 - 1,863 (13page)
- DOI
- 10.1007/s12540-021-01066-8
이용수
초록· 키워드
오류제보하기
Monel 400 was pack-borided in the temperature range of 1173?1273 K for exposure times of 2?6 h. The boride layersproduced on the surface of the alloy were examined by scanning electron microscopy and phase identification was carriedout by X-ray diffraction. The topmost layer on the borided Monel 400 was compact and contained the Ni2Bphase whilethe diffusion zone contained grain boundary precipitates of borides. Boride layers of 35?290 μm thickness and 1002?1476HV0.025hardness were obtained. SEM observations revealed a smooth interface between the boride layer and the diffusionzone. A kinetic model based on the integral method was applied to investigate the kinetics of Ni2Blayer. The boron activationenergy in the Ni2Blayer was estimated as equal to 300.7 kJ mol?1. An experimental validation of the model was madeby comparing the experimental layer thicknesses obtained, after boriding at 1198 K for 1 and 3 h, with predicted values.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
바나듐 및 크롬을 포함하는 다 성분 Boride 코팅의 생성 및 특성 평가
한국표면공학회지
2016 .04
-
Properties and Corrosion Resistance of AISI H13 Hot-Work Tool Steel with Borided B4C Powders
Metals and Materials International
2020 .01
-
Fabrication and properties of in-situ Al/AlB2 composite reinforced with high aspect ratio borides
Steel and Composite Structures, An International Journal
2015 .01
-
Vanadium-Boride코팅의 고온 내입자침식성 평
Corrosion Science and Technology
2015 .01
-
Properties of Aluminum Nano Composites Bearing Alumina Particles and Multiwall Carbon Nanotubes Manufactured by Mechanical Alloying and Microwave Sintering
Metals and Materials International
2023 .03
-
Wear Resistant Duplex Stainless Steels Produced by Spray Forming
Metals and Materials International
2019 .01
-
Review on preparation of zirconium carbide and boride ceramic powders
Journal of Ceramic Processing Research
2022 .10
-
Microstructure Evolution Mechanism and Corrosion Behavior of Transient Liquid Phase Bonded 304L Stainless Steel
Metals and Materials International
2021 .09
-
Effects of Brazing Temperature on Microstructure and High-Temperature Strength of Joints Using a Novel Fourth-Generation Nickel-Based Single Crystal Superalloy
Metals and Materials International
2023 .02
-
Raman spectroscopy of eutectic melting between boride granule and stainless steel for sodium-cooled fast reactors
Nuclear Engineering and Technology
2023 .03
-
Characterization of Electro-deposited Ni-P Layer by Using Dynamic Nano-Indentation Method
한국표면공학회지
2018 .08
-
Effect of Pre- and Post-weld Heat Treatment on Microstructure and Mechanical Properties of GTD-111 Superalloy Welds
Metals and Materials International
2021 .01
-
Weldability Study on SS 304B4 Joined using Boron Containing Austenitic Stainless Steel Consumable
대한용접·접합학회지
2018 .12
-
Formation of Secondary Phases and Their Effect on the Mechanical Properties of Joints Formed by TLP Bonding Using Fe–B–Si Insert Metal in Duplex Stainless Steel
Metals and Materials International
2019 .01
-
Effect of Solidification Mode on Microstructure and Mechanical Properties of AISI420 Steel to SAF2507 Steel Dissimilar Joint Produced by Transient Liquid Phase
Metals and Materials International
2020 .01
-
Optimum growth condition and electrical properties of CuGa0.5In0.5Se₂:Co(0.5 wt %) single crystal thin film for solar cell using hot wall epitaxy method
한국태양에너지학회 학술대회논문집
2017 .04
-
Matrix Transformation in Boron Containing High-Temperature Co–Re–Cr Alloys
Metals and Materials International
2018 .01
-
열처리 시간에 따른 Ni-P/Cr 이중 도금 층의 계면 거동에 관한 연구
한국표면공학회지
2015 .12
-
Strong Cube Texture Formation in Heavily Cold-Rolled Ni8W/Ni12W/Ni8W Composite Alloy Substrates Used in YBCO Coated Conductors
Metals and Materials International
2021 .01
-
레이저 클래딩 공정을 이용한 Ni-Cr-B-Si + WC/12Co 복합 코팅층의 제조 및 기계적 특성
한국분말야금학회지
2017 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0