메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
구자훈 (동의대학교) 박영도 (동의대학교) 구남국 (동의대학교)
저널정보
대한용접·접합학회 대한용접·접합학회지 大韓熔接·接合學會誌 第40卷 第5號
발행연도
2022.10
수록면
401 - 409 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Recently, the importance of welding monitoring is emerging, and in particular, many studies using characteristic values of dynamic resistance curves are being conducted. Among the characteristic values, β-peak, peak on the dynamic resistance curve, contains important information on the extent to which the nugget grows. A common way to extract the β-peak is to determine the local maximum point followed by the local minimum point in the dynamic resistance curve. However, for dynamic resistance curves where local extremum values are unclear, extracting the β-peak in this manner is difficult. Therefore, in this study, a method using heating energy for β-peak extraction was proposed. Heating energy is the energy used until the β-peak is reached. Typically heating energy does not significantly differ even if the welding conditions differ for the same material. Based on the results, the β-peak of the dynamic resistance curve without the clear peak was extracted, and 11 characteristic values were calculated. Among them, three values that had a high correlation with the nugget diameter were selected. Using these values, the nugget diameter was predicted through linear regression analysis.

목차

Abstract
1. 서론
2. 동 저항 커브와 Heating Energy
3. 에너지 기반의 β-peak 추출법 및 품질판단 방법
4. β-peak 추출시험
5. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2023-581-000203825