메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
최태규 (두산퓨얼셀) 홍희기 (경희대학교)
저널정보
대한설비공학회 설비공학논문집 설비공학논문집 제34권 제9호
발행연도
2022.9
수록면
410 - 419 (10page)
DOI
10.6110/KJACR.2022.34.9.410

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (5)

초록· 키워드

오류제보하기
In general, flat-plate solar collectors are installed at an angle of 30° or 45° for the best annual thermal performance. Through experiments in previous studies, it was confirmed that the building integrated forced circulation solar water heater was good in thermal performance. However, it is necessary to compare under the same conditions with the 30° and 45° collectors, which were used much more popularly. In this study, it was impossible to experiment with the same environment, so simulation was conducted. Simulation was performed with TRNSYS18, and the simulation model was verified by comparing it with experimental data. As a result of simulation, in the order of 30°, 45°, and 90° of collector inclination angle, the collection efficiency in the winter season was 37.6%, 38.6%, 39.2%, and the solar fraction was 54.2%, 50.3%, 48.1%, respectively. The performance in summer when the load for hot water supply is small is significantly lower than other inclination angles, but there is little risk of overheating due to the low system temperature.

목차

Abstract
1. 서론
2. 시뮬레이션 모델링 및 방
3. 시뮬레이션 모델 검증 및 분석
4. 시뮬레이션 결과
5. 결론
References

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2022-553-001693736