지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
이 논문의 연구 히스토리 (2)
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
Problems related to waste disposal, such as a shortage of landfill facilities and a surge in illegal waste, are becoming a major social issue. The quantity of wastes generated is continuously increasing, and the rate of wastes from facilities, which accounts for a high percentage of the quantity generated, is gradually increasing. In order to establish an appropriate capacity landfill facility installation plan when planning to develop of industrial complex that discharges large quantity of industrial wastes, the appropriateness of the current industrial complex waste treatment facility installation standards was reviewed, and institutional improvement measures were derived.
The research results are as follows. First, industrial complexes showed a large difference in the distribution of the total site area and the industrial area by type, and the quantity of wastes generated in industrial complexes had a higher correlation coefficient with the industrial area than the total site area. Second, it was proposed to change from the total site area to the industrial area as an improvement plan for the area standard among the current standards for installation of industrial complex waste treatment facility. Third, the average value of the generated unit without considering the size of industry is applied to the generated unit, and there is a limitation in that there is a difference in actual quantity due to the application of the subjective generated unit due to the absence of guidelines for calculating the quantity of wastes generated and the application of the generated unit in the middle classification stage. Fourth, as an improvement measure to the calculation of the quantity of wastes generated in industrial complexes, it was proposed to be specified Industrial Complex Code of the Industrial Land Information System and Korea Standard Industry Code in waste discharge report form to improve utilization and subdivide the industrial waste classification unit. Fifth, considering the limitations of the current industrial complex waste treatment facility installation standards, regional concentration of landfill facilities, and lack of remaining capacity, a total amount management plan was proposed that comprehensively considers the overall status of landfill capacity. Sixth, a plan was proposed to introduce a performance guarantee system, enforcement fine imposition, and deposit system to introduce sanctions on non-fulfillment of the obligation to install waste treatment facilities in industrial complexes.
The research results are as follows. First, industrial complexes showed a large difference in the distribution of the total site area and the industrial area by type, and the quantity of wastes generated in industrial complexes had a higher correlation coefficient with the industrial area than the total site area. Second, it was proposed to change from the total site area to the industrial area as an improvement plan for the area standard among the current standards for installation of industrial complex waste treatment facility. Third, the average value of the generated unit without considering the size of industry is applied to the generated unit, and there is a limitation in that there is a difference in actual quantity due to the application of the subjective generated unit due to the absence of guidelines for calculating the quantity of wastes generated and the application of the generated unit in the middle classification stage. Fourth, as an improvement measure to the calculation of the quantity of wastes generated in industrial complexes, it was proposed to be specified Industrial Complex Code of the Industrial Land Information System and Korea Standard Industry Code in waste discharge report form to improve utilization and subdivide the industrial waste classification unit. Fifth, considering the limitations of the current industrial complex waste treatment facility installation standards, regional concentration of landfill facilities, and lack of remaining capacity, a total amount management plan was proposed that comprehensively considers the overall status of landfill capacity. Sixth, a plan was proposed to introduce a performance guarantee system, enforcement fine imposition, and deposit system to introduce sanctions on non-fulfillment of the obligation to install waste treatment facilities in industrial complexes.
목차
ABSTRACT
1. 서론
2. 폐기물 관리 현황
3. 산업단지 폐기물처리시설 설치기준 검토
4. 산업단지 매립시설 설치 개선방안
Ⅴ. 결론
References
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
가정생활폐기물 배출량 감소에 대한 통계학적 분석: 충주시 시범사업을 중심으로
한국환경기술학회지
2023 .04
-
폐기물 처리 시나리오에 따른 환경효율성 변화 분석 연구
한국폐기물자원순환학회지
2022 .10
-
발생원별 관광폐기물 원단위 발생량 산정 연구 : 제주도 사례를 중심으로
한국폐기물자원순환학회지
2021 .12
-
지역산업연관표에 기반한 국토 공간의 폐기물 투입산출구조 분석 : 수도권을 중심으로
국토계획
2022 .08
-
Long-term food waste management in Phnom Penh utilizing a system dynamics modeling approach
Environmental Engineering Research
2022 .02
-
Analysis of Energy Recovery of Municipal and Industrial Waste Incineration Facilities in Korea
AFORE
2022 .09
-
Synthesis of nanomaterial from industrial waste and its application in environmental pollutant remediation
Environmental Engineering Research
2022 .04
-
코로나가 생활폐기물 발생량에 미치는 영향 : 머신러닝 기반 신경망을 이용한 실증연구
한국폐기물자원순환학회지
2023 .02
-
Investigation of Legal and Regulatory Frameworks of Waste Management System for Very Low Level Waste
한국방사성폐기물학회 학술대회
2017 .01
-
Solid Waste Management in India: A State-of-the-Art Review
Environmental Engineering Research
2023 .08
-
Database Design for Development of Waste Management Program for Clearance Level Waste
한국방사성폐기물학회 학술대회
2018 .01
-
해양쓰레기 현존량에 대한 고찰
한국폐기물자원순환학회지
2016 .01
-
Verification of the adequacy of domestic low-level radioactive waste grouping analysis using statistical methods
Nuclear Engineering and Technology
2022 .07
-
Review of Decommissioning Radioactive Waste Management and Treatment Technology for Waste Type
한국방사성폐기물학회 학술대회
2018 .01
-
Developing the Process of Collecting Samples of the Waste Filter for NPP Waste
한국방사성폐기물학회 학술대회
2018 .01
-
Proposed Regulatory Standards for the Industrial NORM Waste Management
한국방사성폐기물학회 학술대회
2018 .01
-
국내 제조업종에서의 지정폐기물 발생량 예측에 관한 연구
한국폐기물자원순환학회지
2018 .01
-
중금속함유 지정폐기물의 발생량 추정 연구
한국폐기물자원순환학회지
2017 .01
-
폐자원에너지 시설의 환경성 및 경제성 평가에 따른 지원방안 연구
한국폐기물자원순환학회지
2022 .12
-
Evaluation of Structural Stability for Cement Waste Form of Lime Waste
한국방사성폐기물학회 학술대회
2018 .01
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2022-539-001567546