메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
강원모 (과학기술연합대학원대학교) 장형준 (한국기계연구원) 우상희 (한국기계연구원) 이상호 (한국기계연구원) 이상경 (에코닉스) 김홍석 (한국기계연구원)
저널정보
한국자동차공학회 한국자동차공학회논문집 한국자동차공학회논문집 제30권 제8호
발행연도
2022.8
수록면
649 - 657 (9page)
DOI
10.7467/KSAE.2022.30.8.649

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
When the SCR catalyst is coated on DPF instead of oxidation catalyst, the performance of DPF passive regeneration may be reduced. Consequently, it has been attempted to use a burner to enhance the performance of NOx removal and passive soot regeneration. This study sought to verify the feasibility of burner application in the SDPF system through a simple numerical analysis. Well-known chemical kinetics are considered in the numerical analysis to calculate soot oxidation in DPF and NOx conversion in SCR. All data necessary for calculations such as torque, power, emissions of engine, NO oxidation rate in DOC and etc. were obtained from experiments. Results showed that raising the target temperature of the burner was advantageous during SDPF passive regeneration. When the inlet temperature of SDPF was increased from 400°C to 500°C, the regeneration time of SDPF could be reduced from 24 % to 2.5 %. When a burner is used for NOx reduction, high burner target temperature has no significant effect on the improvement of NOx reduction rate, and it even makes fuel penalty worse. When the exhaust gas temperature was controlled at 220°C, the NOx reduction rate was improved by 8.5 % with a fuel penalty of 3 %.

목차

Abstract
1. 서론
2. 실험 및 수치해석 방법론
3. 결과 및 고찰
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0