지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국고분자학회 폴리머 폴리머 제46권 제4호
- 발행연도
- 2022.7
- 수록면
- 436 - 443 (8page)
- DOI
- 10.7317/pk.2022.46.4.436
이용수
초록· 키워드
오류제보하기
This study investigated the damage mechanism of acrylonitrile-butadiene styrene (ABS)/poly(methyl methacrylate) (PMMA)/nano-SiO₂ composites. The distortion and fracture behavior of ABS/PMMA/nano-SiO₂ composites were predicted by developing the homogenization theory and the surface-based cohesive method. This model simulated the elementary action of elastoplastic damage in the matrix, the fracture for the nano-SiO₂ reinforcement, and traction separation for interfaces. The experiment and morphology of the fracture section were validated by the modeling results. The damage mechanisms of ABS/PMMA/nano-SiO₂ composites were researched with the numerical results, and the roles of nano-SiO₂ strength in the mechanical properties of ABS/PMMA blends were discussed in detail.
목차
Abstract
Introduction
Experimental
Results and Discussion
Conclusions
References
참고문헌 (23)
참고문헌 신청
Zhang, A. M.; Zhao, G. Q.; Guan, Y. J. Mechanical and Thermal Properties of ABS/PMMA/Potassium Titanate Whisker Composites. Polym. Plast. Technol. Eng. 2016, 56, 382-390.
Kim, B. K.; Xie, X. M.; Yoon, L. K. Effects of Annealing in ABS Ternary Blends. J. Appl. Polym. Sci. 1997, 66, 1531-1542.
Correa Gómez, E.; Domínguez Almaraz, G. M.; Verduzco Juárez, J. C. Crack Initiation and Propagation on CT Specimens of Two Polymers (ABS and PMMA), Under Cyclic Constant Displacement Loading. Theor. Appl. Fract. Mec. 2019, 100, 55-64.
Shishavan, S. A.; Hasanzadeh, T.; Moradian, R. M. Comprehen sive Investigation of Morphological Properties of ABS/Nanoclay/ PMMA Polymeric Nanocomposite Foam. Polym. Sci. Ser. A 2019, 61, 334-344.
Maries, G. C.; Bungau, D.; Costea, C.; Moldovan, T. Determining the Influence of the Processing Temperature by Injection and of the Subsequent Pressure on the Surface's Hardness and Indentation Modulus of the Products Made of HDPE, PMMA, PC plus ABS through Nanoindentation - G-Series Basic Hardness Modulus at a Depth Method. Mater. Plastic. 2017, 54, 214-220.
Kim, B. K.; Xie, X. M.; Yoon, L. K. Effects of Annealing in ABS Ternary Blends. J. Appl. Polym. Sci. 1997, 66, 1531-1542.
Correa Gómez, E.; Domínguez Almaraz, G. M.; Verduzco Juárez, J. C. Crack Initiation and Propagation on CT Specimens of Two Polymers (ABS and PMMA), Under Cyclic Constant Displacement Loading. Theor. Appl. Fract. Mec. 2019, 100, 55-64.
Shishavan, S. A.; Hasanzadeh, T.; Moradian, R. M. Comprehen sive Investigation of Morphological Properties of ABS/Nanoclay/ PMMA Polymeric Nanocomposite Foam. Polym. Sci. Ser. A 2019, 61, 334-344.
Maries, G. C.; Bungau, D.; Costea, C.; Moldovan, T. Determining the Influence of the Processing Temperature by Injection and of the Subsequent Pressure on the Surface's Hardness and Indentation Modulus of the Products Made of HDPE, PMMA, PC plus ABS through Nanoindentation - G-Series Basic Hardness Modulus at a Depth Method. Mater. Plastic. 2017, 54, 214-220.
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
표면전하를 이용한 SiO2/PMMA 분말의 분산 제어 및 평가
한국분말야금학회지
2015 .01
-
Properties of ABS/PMMA Binary Blend and ABS/PMMA/MBS Ternary Blend : Influence of Rubber Particle Size
폴리머
2016 .09
-
Gloss Control of PMMA/ABS Co-extrusion Sheet Using Cross-linked PMMA Particles
폴리머
2023 .01
-
SIMS를 이용한 SiO₂/PSG/SiO₂/Al-1%Si 및 SiO₂/TEOS/SiO₂/Al-1%Si 적층 박막내의 Na 게터링 분석
한국표면공학회지
2018 .04
-
Isosorbide 기반의 Bio Polycarbonate를 적용한 블렌드의 기계적 물성에 대한 상용성 연구
폴리머
2024 .07
-
Influence of Acrylonitrile-Butadiene-Styrene Composition Ratio and Processing Method on the Properties of Carbon Fiber/ABS Composites
한국고분자학회 학술대회 연구논문 초록집
2018 .04
-
비상용성 PC/ABS 블렌드의 물성에 미치는 ABS 함량과 GO의 영향
폴리머
2016 .07
-
스케일-업 된 초음파 분무 열분해 공정을 이용한 구형 SiO2 분말 합성
한국결정성장학회지
2019 .01
-
Improved Mechanical Properties of Recycled ABS via Polymer Compounding
한국고분자학회 학술대회 연구논문 초록집
2021 .10
-
Inverted Cylindrical Microdomains by Blending Star-shaped and Linear Block Copolymers
한국고분자학회 학술대회 연구논문 초록집
2021 .04
-
Up-Conversion Nanoparticles/PMMA Composites for Light-Emitting Applications
NANO
2020 .01
-
3D 프린팅 ABS 구조물의 표면 절삭가공 특성
한국기계가공학회 춘추계학술대회 논문집
2015 .10
-
Structural, Spectroscopic, Electronic and Optical Properties of Novel Platinum Doped (PMMA/ZrO2) and (PMMA/Al2O3) Nanocomposites for Electronics Devices
Transactions on Electrical and Electronic Materials
2020 .01
-
압출 및 LFT 펠렛을 사용하여 제조한 탄소섬유/ABS 복합재료의 여러 가지 특성에 미치는 ABS수지 종류와 탄소섬유 함량의 영향
폴리머
2022 .03
-
Analysis of Optical and Electrical Properties of SiO₂/Poly-SiO₂ Structure with Various Oxygen Content
AFORE
2021 .10
-
First Principles Calculations of Electronic, Structural and Optical Properties of (PMMA?ZrO 2 ?Au) and (PMMA?Al 2 O 3 ?Au) Nanocomposites for Optoelectronics Applications
Transactions on Electrical and Electronic Materials
2021 .01
-
Synthesis and characterization of Al-SiO2 composites
Journal of Ceramic Processing Research
2019 .01
-
Effect of Etching Temperature on Adhesion and Surface Morphology of Acrylonitrile-Butadiene-Styrene (ABS) Based Material for Plating
한국표면공학회 학술발표회 초록집
2017 .11
-
PC/ABS의 충격강도에 미치는 상용화제와 그래핀 옥사이드의 영향
공업화학
2015 .01
-
Enhancement of Mechanical Strength and Osteoconductivity of Acrylic Bone Cement by Incorporation of Hypo-crystalline PMMA Powder and Bioactive Glass 45S5
한국고분자학회 학술대회 연구논문 초록집
2021 .10
이 논문의 저자 정보
최근 본 자료
댓글(0)
0