메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Jawad Ahmad (Swedish College of Engineering) Rebeca Martinez‑Garcia (University of León) Salem Algarni (King Khalid University) Jesús de‑Prado‑Gil (University of León) Talal Alqahtani (King Khalid University) Kashif Irshad (King Fahd University of Petroleum & Minerals)
저널정보
한국콘크리트학회 International Journal of Concrete Structures and Materials International Journal of Concrete Structures and Materials Vol.16 No.3
발행연도
2022.5
수록면
347 - 364 (18page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Manufacturing waste has been quickly increasing over time as a result of the fast-rising population as well as the consumption of foods that are thrown away dishonestly, resulting in environmental contamination. As a result, it has been suggested that industrial waste disposal may be considerably reduced if it could be integrated into cement concrete manufacturing. The aim of this study is to analyze the properties of concrete employing waste glass (WG) as a binding material in proportions of 5%, 10%, 15%, 20%, 25%, and 30% by weight of cement. The fresh property was assessed using a slump cone test, while mechanical performance was assessed using flexural, compressive, splitting tensile, and pull-out strength after 7, 28, and 56 days. Furthermore, microstructure analysis was studied by scan electronic microscopic (SEM), Fourier-transform infrared spectroscopy (FTIR) and thermo-gravimetric analysis (TGA) test. The results reveal that the addition of discarded glass reduces the workability of concrete. Furthermore, mechanical performance was increased up to a 20% substitution of waste glass and then gradually declined. Waste glass can be employed as a micro filler or pozzolanic material without affecting the mechanical performance of concrete, according to microstructure research.

목차

Abstract
1. Introduction
2. Materials and Methods
3. Results and Discussion
4. Scan Electronic Microscopy (SEM) Results
5. Conclusions
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0