메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
정우철 (Chung-Ang University) 류홍제 (Chung-Ang University)
저널정보
한국조명·전기설비학회 조명·전기설비학회논문지 조명·전기설비학회논문지 제36권 제5호
발행연도
2022.5
수록면
10 - 16 (7page)
DOI
10.5207/JIEIE.2022.36.5.010

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (4)

초록· 키워드

오류제보하기
In this paper, a 60kV high voltage capacitor charger(HVCC) based on a 24V battery was described. The HVCC should satisfy not only the extreme voltage gain for 60kV output based on 24V input but also compact size and lightweight for portability despite the high current burden due to the low input voltage. In addition, there are other considerations such as the voltage stress of each component and insulation. Considering these matters, the HVCC was designed based on the parallel loaded resonant converter and symmetrical Cockcroft-Walton voltage multiplier(CWVM). The parallel load resonant converter enables high-frequency operation by reducing switching losses through the zero voltage switching turn-on and snubber capacitor for soft turn-off. With proper design followed by analysis, the HVCC is capable of ZVS turn-on from the start of charging to charging the target voltage. Two symmetrical CWVMs are connected in parallel to the center-tapped transformer to alleviate voltage stress and insulation design difficulty of high-voltage devices. Through PSpice simulation, it was verified that the HVCC satisfies the target specification and the soft switching operation, and the electric field analysis was performed.

목차

Abstract
1. 서론
2. 고전압 커패시터 충전기 구조
4. 시뮬레이션을 통한 회로 검증
5. 결론
References

참고문헌 (8)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0