메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
박대웅 (한동대학교) 이성윤 (한동대학교) 황승진 (힐랩) 이건희 (한동대학교) 조한진 (한동대학교) 박상현 (한동대학교) 조세례요한 (한동대학교) 유태준 (한동대학교)
저널정보
대한용접·접합학회 대한용접·접합학회지 大韓熔接·接合學會誌 第40卷 第2號
발행연도
2022.4
수록면
156 - 164 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This study introduces laser surface modification technology using a 532 nm Nd:YAG nanosecond laser. A laser beam homogenizer was used to spatially homogenize the laser beam into a square shape with an interference pattern of 30 μm. For laser surface modification processing, primary processing under 110 conditions was first performed, and then, 15 types of main processing conditions were determined based on the three-dimensional surface structure of laser surface modified zircaloy-4. Subsequently, the specimen was post-processed using three methods: left in the air (25 ℃), heated in the oven (200 ℃ for 2 h), and boiled in water (100 ℃ for 2 h). In the absence of post-processing or with heat post-processing, the laser surface modified zircaloy-4 showed super hydrophobicity with a contact angle of 150° or higher for specific laser surface processing parameters. Under specific laser surface processing conditions, the laser surface modified zircaloy-4 with boiling water post-processing exhibited properties close to super hydrophilic with a contact angle of less than 5°. It was confirmed that the surface wettability of zircaloy-4 can be controlled using a spatially shaped nanosecond laser beam.

목차

Abstract
1. 서론
2. 실험 장치 및 방법
3. 실험 결과 및 토의
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2022-581-001128338