메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
황은수 (Korea Research Institute of Ships and Ocean Engineering) 정홍석 (Korea Research Institute of Ships and Ocean Engineering) 설한신 (Korea Research Institute of Ships and Ocean Engineering)
저널정보
한국소음진동공학회 한국소음진동공학회논문집 한국소음진동공학회논문집 제32권 제1호(통권 264호)
발행연도
2022.2
수록면
45 - 57 (13page)
DOI
10.5050/KSNVE.2022.32.1.045

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
To localize cavitation noise using the beam forming method, sensors are mounted above the propeller on the hull surface of a model-scale ship. Beam forming results are highly dependent on the number and arrangement of sensors; thus, an array with a large number of sensors for a wide range will have good performance. However, it is difficult for such a system to be applied to a model scale, or to a full-scale ship in practical applications. A model-scale experiment was thus conducted at the cavitation tunnel of KRISO using various on-board sensor arrangements. The performance of each arrangement was verified from the experiment using the reference noise source, and it was confirmed that the location of the noise source could be estimated. Additionally, a feasibility study was carried out for a model ship with a single screw propeller, and it was confirmed that the location of the cavitation noise at the 12 o’clock position of the propeller was well represented.

목차

ABSTRACT
1. 서론
2. 제한된 영역에서의 센서 배치
3. 실험적 검증
4. 결론
References

참고문헌 (8)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2022-424-000197635