지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2021.12
- 수록면
- 426 - 433 (8page)
이용수
초록· 키워드
오류제보하기
In this study, three types of synthetic fiber materials were evaluated, namely, DM20, SK78, and T147, to replace steel chains in shipbuilding and offshore fields with fiber chains as there is increasing demand for chains with lighter weights and improved usabilities. The strength and quasi-static stiffness were analyzed to select suitable yarns for the fiber chains. The durability of the yarn was evaluated by performing a 3-T (time to rupture) test as a specific tension level. The results of the experiment revealed excellent dynamic stiffness in DM20 and highest values of the windward and leeward stiffness in T147. 3-T linear design characteristic curves for a specific tension level were derived for the three types of fiber materials. The findings of this study can provide insights for improving strength and durability in fiber chain design.
목차
ABSTRACT
1. Introduction
2. Materials and Methods
3. Results and Discussion
4. Conclusion
References
참고문헌 (21)
참고문헌 신청
Banfield, S., & Casey, N. (1998). Evaluation of Fiber Rope Properties for Offshore Mooring. Ocean Engineering, 25(10), 861‒79. https://doi.org/10.1016/S0029-8018(97)10017-8
Del Vecchio, C.J.M. (1992). Light Weight Materials for Deep Water Moorings (Ph.D. Thesis). University of Reading, UK.
Petruska, D.J., Kelly, P., Stone, B., Ahjem, V., Zimmerman, E.H., Garrity, R., & Veselis,Y. (2010). Fiber Moorings, Recent Experiences and Research: Updating API RP 2SM on Synthetic Fiber Rope for Offshore Moorings. Offshore Technology Conference, Houston, USA. https://doi.org/10.4043/20836-MS
Davies, P., Francois, M., Grosjean, F., Baron, P., Salomon, K., & Trassoudaine, D. (2002) Synthetic Mooring Lines for Depths to 3000 Meters. Offshore Technology Conference, Houston, USA. https://doi.org/10.4043/14246-MS
Chi, C.H., Lundhild, E.M., Veselis, T., & Huntley, M. (2009) Enabling Ultra-Depwater Mooring with Aramid Fiber Rope Technology. Offshore Technology Conference, Houston, USA. https://doi.org/10.4043/20074-MS
Del Vecchio, C.J.M. (1992). Light Weight Materials for Deep Water Moorings (Ph.D. Thesis). University of Reading, UK.
Petruska, D.J., Kelly, P., Stone, B., Ahjem, V., Zimmerman, E.H., Garrity, R., & Veselis,Y. (2010). Fiber Moorings, Recent Experiences and Research: Updating API RP 2SM on Synthetic Fiber Rope for Offshore Moorings. Offshore Technology Conference, Houston, USA. https://doi.org/10.4043/20836-MS
Davies, P., Francois, M., Grosjean, F., Baron, P., Salomon, K., & Trassoudaine, D. (2002) Synthetic Mooring Lines for Depths to 3000 Meters. Offshore Technology Conference, Houston, USA. https://doi.org/10.4043/14246-MS
Chi, C.H., Lundhild, E.M., Veselis, T., & Huntley, M. (2009) Enabling Ultra-Depwater Mooring with Aramid Fiber Rope Technology. Offshore Technology Conference, Houston, USA. https://doi.org/10.4043/20074-MS
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Experimental investigating the properties of fiber reinforced concrete by combining different fibers
Computers and Concrete, An International Journal
2020 .01
-
Quantification of Fibers through Automatic Fiber Reconstruction from 3D Fluorescence Confocal Images
JOURNAL OF ADVANCED INFORMATION TECHNOLOGY AND CONVERGENCE
2020 .07
-
섬유혼입률 및 섬유길이 변화에 따른 탄소섬유 보강시멘트 복합재료의 역학적 특성과 내충격성 검토
한국구조물진단유지관리공학회 논문집
2019 .01
-
SiC/p-Aramid 복합방적사 제조기술 연구
한국염색가공학회지
2021 .12
-
A Study on Design Variables for Increasing the Breaking Strength of Synthetic Fiber Chain
한국해양공학회지
2023 .02
-
4C의 MMOptical Fiber를 수용 가능한 Fiber Guide의 구조물에 관한 구조 해석 시뮬레이션
한국기계가공학회 춘추계학술대회 논문집
2017 .10
-
유리섬유 코팅사와 탄소섬유를 이용한 일방향 탄소섬유시트 제조 공정이 콘크리트 보강에 미치는 영향
한국염색가공학회지
2022 .09
-
4C의 MM Optical Fiber를 수용 가능한 Fiber Guide의 구조해석
한국기계가공학회지
2017 .12
-
CFRP 밀링 공정에서 탄소섬유의 절삭 길이가 Fiber Pull-out 에 미치는 영향
한국정밀공학회 학술발표대회 논문집
2018 .05
-
Seismic Retrofitting of RC Circular Columns Using Carbon Fiber, Glass Fiber, or Ductile PET Fiber
International Journal of Concrete Structures and Materials
2021 .11
-
Workability and Mechanical Properties of Hybrid Fiber Reinforced Concrete Using Amorphous Steel Fiber and Polyamide Fiber
한국건설순환자원학회논문집
2016 .12
-
Corrosion effects on mechanical behavior of steel fiber reinforced concrete, including fibers from recycled tires
Computers and Concrete, An International Journal
2020 .01
-
보트에 적용되는 하이브리드 복합재에 대한 기계적 특성 연구
대한용접·접합학회지
2016 .04
-
Damage and stiffness research on steel shape steel fiber reinforced concrete composite beams
Computers and Concrete, An International Journal
2019 .01
-
Mechanical Properties of Lightweight Aggregate Concrete Reinforced with Various Steel Fibers
International Journal of Concrete Structures and Materials
2022 .11
-
Synergistic Effects of Polypropylene and Glass Fiber on Mechanical Properties and Durability of Recycled Aggregate Concrete
International Journal of Concrete Structures and Materials
2020 .09
-
Evaluation of Strength Transition Rate for 6.8 L Composite Pressure Vessel Using Domestic High Strength Carbon Fiber
Journal of the Korean Society for Precision Engineering
2020 .11
-
Experimental Toughness and Durability Evaluation of FRC Composite Reinforced with Steel–Polyester Fiber Combination
International Journal of Concrete Structures and Materials
2023 .09
-
The Effect of Plasma Treatment on the Surface of Metal Fibers
한국고분자학회 학술대회 연구논문 초록집
2021 .04
-
콘크리트 구조물의 내구성 향상을 위한 보강콘크리트의 강도특성에 관한 연구
환경관리학회지
2019 .06
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2022-454-000066066