지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국계산역학회 Computers and Concrete, An International Journal Computers and Concrete, An International Journal Vol.25 No.6
- 발행연도
- 2020.1
- 수록면
- 509 - 516 (8page)
이용수
초록· 키워드
오류제보하기
Adding fibers improves concrete performance in respect of strength and plasticity. There are numerous fibers for use in concrete that have different mechanical properties, and their combination in concrete changes its behavior. So, to investigate the behavior of the fiber reinforced concrete, an in vitro study was conducted on concrete with different fiber compositions including different ratios of steel, polypropylene and glass fibers with the volume of 1%. Two forms of fibers including singlestranded and aggregated fibers have been used for testing, and the specimens were tested for compressive strength and dividable tensile strength (splitting tensile) to determine the optimal ratio of the composition of fibers in the concrete reinforced by hybrid fibers. The results show that the concrete with a composition of steel fibers has a better performance than other compounds. In addition, by adding glass and propylene fibers to the composition of steel fibers, the strength of the samples is reduced. Also, if using the combination of fibers is required, the use of a combination of glass fibers with steel fibers will provide a better compressive strength and tensile strength than the combination of steel fibers with propylene.
목차
등록된 정보가 없습니다.
참고문헌 (36)
참고문헌 신청
Şeref Doğuşcan Akbaş / 2016 / Analytical solutions for static bending of edge cracked micro beams / Structural Engineering and Mechanics, An Int＇l Journal 59(3):579~599
2012 / ASTM C150, Standard Specification for Portland Cement / American Standards for Testing and Materials
2012 / ASTM C39, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens / American Standards for Testing and Materials
2011 / ASTM C496, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens / American Standards for Testing and Materials
Alireza Bagher Shemirani / 2018 / The discrete element method simulation and experimental study of determining the mode I stress-intensity factor / Structural Engineering and Mechanics, An Int＇l Journal 66(3):379~386
2012 / ASTM C150, Standard Specification for Portland Cement / American Standards for Testing and Materials
2012 / ASTM C39, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens / American Standards for Testing and Materials
2011 / ASTM C496, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens / American Standards for Testing and Materials
Alireza Bagher Shemirani / 2018 / The discrete element method simulation and experimental study of determining the mode I stress-intensity factor / Structural Engineering and Mechanics, An Int＇l Journal 66(3):379~386
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Corrosion effects on mechanical behavior of steel fiber reinforced concrete, including fibers from recycled tires
Computers and Concrete, An International Journal
2020 .01
-
Workability and Mechanical Properties of Hybrid Fiber Reinforced Concrete Using Amorphous Steel Fiber and Polyamide Fiber
한국건설순환자원학회논문집
2016 .12
-
유리섬유 코팅사와 탄소섬유를 이용한 일방향 탄소섬유시트 제조 공정이 콘크리트 보강에 미치는 영향
한국염색가공학회지
2022 .09
-
Interaction of magnetic water and polypropylene fiber on fresh and hardened properties of concrete
Steel and Composite Structures, An International Journal
2021 .01
-
Experimental investigation on self-compacting concrete reinforced with steel fibers
Structural engineering and mechanics : An international journal
2016 .01
-
Mechanical Properties of Lightweight Aggregate Concrete Reinforced with Various Steel Fibers
International Journal of Concrete Structures and Materials
2022 .11
-
Experimental Toughness and Durability Evaluation of FRC Composite Reinforced with Steel–Polyester Fiber Combination
International Journal of Concrete Structures and Materials
2023 .09
-
섬유혼입률 및 섬유길이 변화에 따른 탄소섬유 보강시멘트 복합재료의 역학적 특성과 내충격성 검토
한국구조물진단유지관리공학회 논문집
2019 .01
-
Effect of waste cement bag fibers on the mechanical strength of concrete
Advances in materials research : AMR
2019 .01
-
Residual properties of high-strength fiber reinforced concrete after exposure to high temperatures
Computers and Concrete, An International Journal
2019 .01
-
Resistance of concrete made of fibers in weight lifting slabs against impact in sports training
Structural Engineering and Mechanics, An Int＇l Journal
2023 .05
-
Effect of steel fiber volume fraction and aspect ratio type on the mechanical properties of SIFCON-based HPFRCC
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
Experimental investigation on self-compacting concrete reinforced with steel fibers
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
물결합재비 및 섬유 혼입율 변화에 따른 조합섬유 활용 HPFRCC의 물리적 특성
대한건축학회 논문집 - 구조계
2015 .11
-
Quantification of Fibers through Automatic Fiber Reconstruction from 3D Fluorescence Confocal Images
JOURNAL OF ADVANCED INFORMATION TECHNOLOGY AND CONVERGENCE
2020 .07
-
Seismic Retrofitting of RC Circular Columns Using Carbon Fiber, Glass Fiber, or Ductile PET Fiber
International Journal of Concrete Structures and Materials
2021 .11
-
Numerical Investigation on Nozzle Shapes in the Alignment of Steel Fibers
대한토목학회 학술대회
2017 .10
-
Steel Fiber Reinforced Concrete: Behavior, Modelling and Design
대한토목학회지
2021 .02
-
4C의 MMOptical Fiber를 수용 가능한 Fiber Guide의 구조물에 관한 구조 해석 시뮬레이션
한국기계가공학회 춘추계학술대회 논문집
2017 .10
-
Evaluation of Strength Transition Rate for 6.8 L Composite Pressure Vessel Using Domestic High Strength Carbon Fiber
Journal of the Korean Society for Precision Engineering
2020 .11
이 논문의 저자 정보
최근 본 자료
댓글(0)
0