메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Han-Sol Yun (Inha University) Jong-Chan Kim (Inha University) Dae-Yong Jeong (Inha University) Nam-Hee Cho (Inha University)
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.22 No.6
발행연도
2016.1
수록면
1,108 - 1,115 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Nanoscale alumina (Al2O3) powders with an average size of 100, 200, or 300 nm were sintered to investigatethe effects of the initial powder size on the densification behavior under the application of microwaves(2.45 GHz, 2 kW). The sintering was performed using microwave-assisted sintering (MWS) and conventionalsintering (CS) methods in the temperature range of 1100–1600 °C for 0–180 min. The Al2O3 samples preparedwith the 100-nm-sized powders using MWS exhibited a relative density (RD) of over 90% when sinteredat 1200 °C for 10 min; the same RD was achieved at 1500 °C when the sintering was performed for the sametime using CS. However, a sintering temperature difference of ~100 °C for a RD of ~90% was observed betweenthe MWS and CS methods for the 300-nm-sized powders. Nano-grained (~290 nm) Al2O3 ceramics with a highdensity of 90% were obtained from nanoscale powders (~100 nm) using MWS methods. The response ofthe nanoscale powders to microwaves was more significant as the initial powder size decreased from 300to 100 nm.

목차

등록된 정보가 없습니다.

참고문헌 (35)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0