지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.24 No.2
- 발행연도
- 2017.1
- 수록면
- 201 - 211 (11page)
이용수
초록· 키워드
오류제보하기
This study evaluates the reliability of present European codes in predicting the collapse load of columns made with perforated cold-formed steel (CFS) profiles under combined axial load and bending. To this aim, a series of experimental tests on slender open-section specimens have been performed at varying load eccentricity. Preliminarily, stub column tests have also been performed to calculate the effective section properties of the investigated profile. By comparison of experimental data with code-specified M-N strength domains, the authors demonstrate that present code formulations may underestimate the collapse load of thin-walled perforated open sections. The study is the first step of a wider experimental and numerical study aimed at better describing strength domains of perforated CFS open sections.
목차
등록된 정보가 없습니다.
참고문헌 (38)
참고문헌 신청
Angotti, F. / 2002 / Assessment of structural performance of HSC slender columns via experimental tests and numerical analysis / Proceedings of the 6th International Symposium on Utilization of High Strength / High Performance Concrete 1:149~164
Bernuzzi, C. / 2001 / Experimental analysis on the cyclic behaviour of beam-to-column joints in steel storage pallet racks / Thin-Wall. Struct 39(10):841~859
Bertocci, L. / 2016 / Experimental, numerical, and regulatory P-Mx-My domains for cold-formed perforated steel uprights of pallet-racks / Thin-Wall. Struct
Camotim, D. / 2010 / GBT buckling analysis of thin-walled steel frames: A state- of-the-art report / Thin-Wall. Struct. 48(10-11):726~743
CEN-COMITÉ EUROPÉEN DE NORMALISATION / 2006 / EN 1993-1-1: Eurocode 3: Design of steel structures – Part 1-1: General rules and rules for buildings
Bernuzzi, C. / 2001 / Experimental analysis on the cyclic behaviour of beam-to-column joints in steel storage pallet racks / Thin-Wall. Struct 39(10):841~859
Bertocci, L. / 2016 / Experimental, numerical, and regulatory P-Mx-My domains for cold-formed perforated steel uprights of pallet-racks / Thin-Wall. Struct
Camotim, D. / 2010 / GBT buckling analysis of thin-walled steel frames: A state- of-the-art report / Thin-Wall. Struct. 48(10-11):726~743
CEN-COMITÉ EUROPÉEN DE NORMALISATION / 2006 / EN 1993-1-1: Eurocode 3: Design of steel structures – Part 1-1: General rules and rules for buildings
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
On bending analysis of perforated microbeams including the microstructure effects
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
유공강판의 횡력저항능력에 대한 실험적 연구
대한건축학회 논문집 - 구조계
2020 .05
-
Equivalent Material Properties of Thin and Thick Perforated Plate by FEM simulation
대한기계학회 춘추학술대회
2018 .12
-
SECTION_SECTION
월간 데코 DECO
2023 .09
-
Behavior and design of perforated steel storage rack columns under axial compression
Steel and Composite Structures, An International Journal
2015 .01
-
Efficient cross-sectional profiling of built up CFS beams for improved flexural performance
Steel and Composite Structures, An International Journal
2020 .01
-
다공패널형 공명기의 흡음성능에 관한 연구
설비공학논문집
2016 .06
-
Perforated TWCF steel beam-columns: European design alternatives
Steel and Composite Structures, An International Journal
2020 .01
-
Study on DAS-Based Time Synchronization for Improving Reliability of Section Load Estimation
KEPCO Journal on electric power and energy
2015 .01
-
전기 집진기 내부의 효율적 유동 확산을 위한 다공성 판막의 배열
대한기계학회 춘추학술대회
2017 .11
-
Stiffening evaluation of flat elements towards stiffened elements under axial compression
Advances in computational design
2018 .01
-
Behaviour and strength of back-to-back built-up cold-formed steel unequal angle sections with intermediate stiffeners under axial compression
Steel and Composite Structures, An International Journal
2022 .01
-
Experimental study on the axial bearing capacity of built-up cold-formed thin-walled steel multi-limb-section columns
Steel and Composite Structures, An International Journal
2021 .09
-
Effect of angle stiffeners on the flexural strength and stiffness of cold-formed steel beams
Steel and Composite Structures, An International Journal
2019 .01
-
Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines
Steel and Composite Structures, An International Journal
2020 .01
-
Assessment of Equivalent Elastic Modulus of Perforated Spherical Plates
한국압력기기공학회 논문집
2019 .06
-
Structural performance of cold-formed steel composite beams
Steel and Composite Structures, An International Journal
2018 .01
-
Experimental and numerical studies on the behaviour of corroded cold-formed steel columns
Steel and Composite Structures, An International Journal
2020 .01
-
Flexural Strength of cold-formed steel built-up composite beams with rectangular compression flanges
Steel and Composite Structures, An International Journal
2020 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0