지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Structural Engineering and Mechanics, An Int'l Journal Structural Engineering and Mechanics, An Int'l Journal Vol.60 No.5
- 발행연도
- 2016.1
- 수록면
- 903 - 921 (19page)
이용수
초록· 키워드
오류제보하기
To study the effect of looseness on mechanical behavior of dovetail mortise-tenon joints, five dovetail mortise-tenon joints, including one intact joint and four loose joints, were fabricated and tested under cycle lateral loadings, and non-linear finite element models using the software ABAQUS were also developed. The effects of looseness on stress distribution, rotational stiffness and bearing capacity of joints were studied based on the analysis of test and simulation results. The results indicate that the hysteretic loops are anti-Z-shaped and present typical characteristics of pinching and slippage, the envelop curves of joints are classified as following two stages: elastic and strengthening stage. The peak stress, rotational stiffness and bearing capacity of joints were reduced due to looseness. The moment-rotation theoretical model of intact joint was simplified in terms of the relation of construction dimensions for buildings, and the moment-rotation theoretical model considering the effect of looseness was proposed and validated.
목차
등록된 정보가 없습니다.
참고문헌 (26)
참고문헌 신청
Bedon, C. / 2015 / Numerical and analytical assessment of the buckling behaviour of Blockhaus log-walls under in-plane compression / Eng. Struct 82:134~150
Bedon, C. / 2015 / Experimental study and numerical investigation of blockhaus shear walls subjected to in-plane seismic loads / J. Struct. Eng 141(4):1~11
Bedon, C. / 2015 / Assessment of the structural stability of Blockhaus timber log-walls under in-plane compression via full-scale buckling experiments / Constr. Build. Mater 78:474~490
Branco, J.M. / 2012 / Structural behaviour of log timber walls under lateral in-plane loads / Eng. Struct 40:371~382
Chang, W.S. / 2011 / Development of all-wood connections with plywood flitch plate and oak pegs / Adv. Struct. Eng 14(2):123~132
Bedon, C. / 2015 / Experimental study and numerical investigation of blockhaus shear walls subjected to in-plane seismic loads / J. Struct. Eng 141(4):1~11
Bedon, C. / 2015 / Assessment of the structural stability of Blockhaus timber log-walls under in-plane compression via full-scale buckling experiments / Constr. Build. Mater 78:474~490
Branco, J.M. / 2012 / Structural behaviour of log timber walls under lateral in-plane loads / Eng. Struct 40:371~382
Chang, W.S. / 2011 / Development of all-wood connections with plywood flitch plate and oak pegs / Adv. Struct. Eng 14(2):123~132
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Analysis on mechanical behavior of dovetail mortise-tenon joints with looseness in traditional timber buildings
Structural engineering and mechanics : An international journal
2016 .01
-
Study on mechanical behaviors of loose mortise-tenon joint with neighbouring gap
Structural Engineering and Mechanics, An Int＇l Journal
2021 .01
-
Research on damage and identification of mortise-tenon joints stiffness in ancient wooden buildings based on shaking table test
Structural engineering and mechanics : An international journal
2018 .01
-
Remote Diagnosis of Air Handling Unit Belt Looseness using a Smartphone based on High-accurate Calibration
Journal of the Korean Society for Precision Engineering
2024 .08
-
Research on damage and identification of mortise-tenon joints stiffness in ancient wooden buildings based on shaking table test
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
Detection and location of bolt group looseness using ultrasonic guided wave
Smart Structures and Systems, An International Journal
2019 .01
-
스마트폰 한 대를 이용한 공조기 Looseness 진단
대한기계학회 춘추학술대회
2022 .11
-
조선시대 다포계 건축물의 결구형태별 구조성능 평가
한국구조물진단유지관리공학회 논문집
2019 .01
-
Seismic behavior and strength of L-shaped steel reinforced concrete column-concrete beam planar and spatial joints
Steel and Composite Structures, An International Journal
2021 .01
-
Simplified beam-column joint model for reinforced concrete moment resisting frames
Structural Engineering and Mechanics, An Int＇l Journal
2024 .01
-
베어링 조립부 마모에 의한 아우터 레이스 이탈 개선
한국자동차공학회 춘계학술대회
2018 .06
-
건설 중장비용 Center Joint의 구조해석
한국기계가공학회 춘추계학술대회 논문집
2022 .04
-
협력 로봇의 다중 위치 볼트 풀림 진단 SVM 축-동작 혼합 모델
한국정보과학회 학술발표논문집
2020 .12
-
Study on the mechanical behaviors of timber frame with the simplified column foot joints
Structural Engineering and Mechanics, An Int＇l Journal
2021 .01
-
Characteristics of CFRP strengthened tubular joints subjected to different monotonic loadings
Steel and Composite Structures, An International Journal
2019 .01
-
시스템 동바리의 수직재와 수평재 연결부 경계조건에 따른 거동 분석
한국안전학회지
2017 .01
-
Structural joint modeling and identification: numerical and experimental investigation
Structural engineering and mechanics : An international journal
2015 .01
-
Joints in Steel Construction: Simple Joints to Eurocode 3
한국강구조학회지
2017 .04
-
Experimental and numerical studies on cyclic behavior of continuous-tenon joints in column-and-tie timber construction
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
Mechanical and fracture behavior of rock mass with parallel concentrated joints with different dip angle and number based on PFC simulation
Geomechanics & engineering
2015 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0