지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Structural Engineering and Mechanics, An Int'l Journal Structural Engineering and Mechanics, An Int'l Journal Vol.77 No.4
- 발행연도
- 2021.1
- 수록면
- 509 - 521 (13page)
이용수
초록· 키워드
오류제보하기
The neighbouring gaps at the mortise-tenon joint in traditional timber structure, which leads to the complexity of the joint, are considered to impair the mechanical performance of the joint. In this paper, numerical simulation of loose joint was conducted to examine the deformation states, stress distributions, and bearing capacities, which was verified by full-scale test. On the basis of the experimental and numerical results, a simplified mechanics model with gaps has been proposed to present the bending capacity of the loose joint. Besides, the gap effects and parameter studies on the influences of tenon height, friction coefficient, elastic modulus and axial load were also investigated. As a result, the estimated relationship between moment and rotation angle of loose joint showed the agreement with the numerical results, demonstrating validity of the proposed model; The bending bearing capacity and rotational stiffness of loose joint had a certain drop with the increasing of gaps; and the tenon height may be the most important factor affecting the mechanical behaviors of the joint when it is subjected to repeated load; Research results can provide important references on the condition assessments of the existing mortise-tenon joint.
목차
등록된 정보가 없습니다.
참고문헌 (27)
참고문헌 신청
Ban, S. / 1941 / Study on statics for structures of temple and shrine part-1 / Technical Papers of Annual Meeting :252~258
Chang, W. S. / 2007 / Rotational performance of traditional Nuki joints with gap II : the behavior of butted Nuki joint and its comparison with continuous Nuki joint / J. Wood Sci 53(5):401~407
Chang, W. S. / 2006 / Rotational performance of traditional Nuki joints with gap I : Theory and verification / J. Wood Sci 52(1):58~62
Chen, C. C. / 2016 / Flexural behavior of penetrated mortise-tenon joints / J. Southeast Univ. (Nat. Sci. Ed. ) 46(2):326~334
Chen, Z. Y. / 2011 / Numerical simulation of mechanical behaviour of wood under complex stress / Chin. J. Comput. Mech 28(4):629~635
Chang, W. S. / 2007 / Rotational performance of traditional Nuki joints with gap II : the behavior of butted Nuki joint and its comparison with continuous Nuki joint / J. Wood Sci 53(5):401~407
Chang, W. S. / 2006 / Rotational performance of traditional Nuki joints with gap I : Theory and verification / J. Wood Sci 52(1):58~62
Chen, C. C. / 2016 / Flexural behavior of penetrated mortise-tenon joints / J. Southeast Univ. (Nat. Sci. Ed. ) 46(2):326~334
Chen, Z. Y. / 2011 / Numerical simulation of mechanical behaviour of wood under complex stress / Chin. J. Comput. Mech 28(4):629~635
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Analysis on mechanical behavior of dovetail mortise-tenon joints with looseness in traditional timber buildings
Structural engineering and mechanics : An international journal
2016 .01
-
Analysis on mechanical behavior of dovetail mortise-tenon joints with looseness in traditional timber buildings
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
Research on damage and identification of mortise-tenon joints stiffness in ancient wooden buildings based on shaking table test
Structural engineering and mechanics : An international journal
2018 .01
-
Research on damage and identification of mortise-tenon joints stiffness in ancient wooden buildings based on shaking table test
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
Experimental and numerical studies on cyclic behavior of continuous-tenon joints in column-and-tie timber construction
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
Seismic behavior and strength of L-shaped steel reinforced concrete column-concrete beam planar and spatial joints
Steel and Composite Structures, An International Journal
2021 .01
-
Study on the mechanical behaviors of timber frame with the simplified column foot joints
Structural Engineering and Mechanics, An Int＇l Journal
2021 .01
-
Structural performance of timber frame joints - Full scale tests and numerical validation
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
뭉치면 죽고, 흩어지면 살 것
대한토목학회지
2021 .04
-
건설 중장비용 Center Joint의 구조해석
한국기계가공학회 춘추계학술대회 논문집
2022 .04
-
Mechanical and fracture behavior of rock mass with parallel concentrated joints with different dip angle and number based on PFC simulation
Geomechanics & engineering
2015 .01
-
Characteristics of CFRP strengthened tubular joints subjected to different monotonic loadings
Steel and Composite Structures, An International Journal
2019 .01
-
인체 동작 시 관절 부하에 대한 허용 능력 평가 시스템
한국CDE학회 학술발표회 논문집
2015 .02
-
Structural joint modeling and identification: numerical and experimental investigation
Structural engineering and mechanics : An international journal
2015 .01
-
Bolted joints for single-layer structures: numerical analysis of the bending behaviour
Structural engineering and mechanics : An international journal
2015 .01
-
Study on mechanical behaviors of column foot joint in traditional timber structure
Structural engineering and mechanics : An international journal
2018 .01
-
Study of tensile behavior of Y shape non-persistent joint using experimental test and numerical simulation
Computers and Concrete, An International Journal
2020 .01
-
상대가속도 적분을 통한 IMU 기반 신체 관절각과 상대위치 동시 추정
제어로봇시스템학회 논문지
2020 .09
-
Experimental Evaluation of Water Supply Pipe Joints against Seismic Ground Deformation: A Four-point Bending Test
Environmental Engineering Research
2023 .06
-
Optimal location of a single through-bolt for efficient strengthening of CHS K-joints
Structural Engineering and Mechanics, An Int＇l Journal
2024 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0