지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2021.1
- 수록면
- 3,058 - 3,069 (12page)
이용수
초록· 키워드
오류제보하기
In this work, aluminium metal matrix composite reinforced with hard silicon nitride (Si3N4) particles have been performedexperimentally. Squeeze casting technique was adopted to synthesis the novel AMMC for different weight fractions ofSi3N4(3, 6 and 9%). The AMMC is characterized for their tensile strength, micro-Vickers, density and porosity, compressivestrength, impact, corrosion and wear resistance, as per ASTM standards. Observation shows that, with the inclusion ofSi3N4particle, the mechanical behaviour, corrosion and wear-resistant of synthesized composites was considerably improved. Scanning Electron microscope micrograph of worn surfaces displays the presence of grooves parallel to the sliding directionand some plastic deformations. The inclusion of Si3N4shows deep grooving, that is associated with abrasive wear.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Influence of Artificial Aging on Mechanical Properties and High Stress Abrasive Wear Behaviour of Al–Mg–Si Alloy
Metals and Materials International
2021 .01
-
Abrasive Wear Behaviour of TiB2 Reinforced In?Situ Synthesized Magnesium RZ5 Alloy based Metal Matrix Composites
Metals and Materials International
2021 .09
-
Multi objective optimization of wear characteristics on Al7075/Al2O3/B4C composites - Desirability approach
Journal of Ceramic Processing Research
2020 .01
-
Studies on High Temperature Wear and Friction Behaviour of AA6061/B4C/hBN Hybrid Composites
Metals and Materials International
2021 .01
-
Microstructure and Wear Resistance of in situ Porous TiO/Cu Composites
Metals and Materials International
2016 .01
-
Influence of B4C on Dry Sliding Wear Behavior of B4C/Al?Mg?Si Composites Synthesized via Powder Metallurgy Route
Metals and Materials International
2021 .10
-
High?Temperature Dry Sliding Wear Behavior of Al?12Si?CuNiMg Alloy and its Al2O3 Fiber?Reinforced Composite
Metals and Materials International
2021 .09
-
Microstructure and Wear Properties of Cu–La2O3 Composites Prepared by Spark Plasma Sintering
Metals and Materials International
2021 .01
-
Effect of Rolling and Coiling Temperatures on Microstructure and Mechanical Properties of Medium-Carbon Pipeline Steel
Metals and Materials International
2020 .01
-
Machine Learning and Statistical Approach to Predict and Analyze Wear Rates in Copper Surface Composites
Metals and Materials International
2021 .01
-
상대재와 분위기에 따른 순철의 미끄럼 마멸 기구 분석
소성·가공
2017 .12
-
과공정 Al-15wt.%Si 압출재와 회주철의 미세조직 및 엔진 오일 환경에서의 마모 특성
소성·가공
2018 .12
-
New anti-wear alloy development & Biomass-caused equipment wear issues & mitigation strategy
대한기계학회 춘추학술대회
2021 .05
-
미끄럼 속도변화에 따른 철강재료의 미끄럼 마모거동(중마모 거동에 미치는 연마모 도입시험의 영향)
Tribology and Lubricants
2020 .06
-
Optimization of Wear Behavior on Cenosphere -Aluminium Composite
한국재료학회지
2015 .01
-
Development of high hardness and wear resistance composite coatings
한국표면공학회 학술발표회 초록집
2017 .11
-
Pin-on-disc 실험을 통한 POM 소재의 마모거동 분석
한국기계가공학회 춘추계학술대회 논문집
2022 .04
-
이종 상대재 경도에 따른 철강재료의 미끄럼 마모 특성 해석
Tribology and Lubricants
2016 .12
-
초고강도강판 프레스성형용 금형의 CrN 코팅층 마모수명 예측
소성·가공
2017 .06
-
연마재 작업조건에 따른 폴리우레탄 재질의 마모량 예측에 관한 연구
한국기계기술학회지
2018 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0