메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
정병길 (동의대학교) 이승원 (동의대학교) 윤권감 (동의대학교 환경공학과) 정진희 (동아대학교) 최영익 (동아대학교)
저널정보
한국환경기술학회 한국환경기술학회지 한국환경기술학회지 제21권 제6호
발행연도
2020.1
수록면
453 - 457 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The purposes of this study were to evaluate the removal characteristics of Ni and T-P and to derive the optimum operating conditions according to the NaOCl injection methods by using ORP and pH for raw wastewater from the break point chlorinaton(BPC) unit process in the plating wastewater treatment process. The coagulant experiments were performed by using a Jar tester. After the coagulant tests, the supernatant water in the samples was filtered with a filter paper, and the concentration of Ni and T-P were analyzed using an ICP-OES analyzer. The removal efficiencies of Ni according to the polymer dosage at pH 10.0, 10.5 and 11.0 were 6.2%, 1.8% and 0.9%, respectively. It showed the highest Ni removal efficiency at pH 10.0. The Ni removal efficiencies of raw wastewater by the continuous NaOCl injection method at 400 mV, 700 mV, 750 mV, 800 mV and 850 mV were 55.7%, 86.6%, 89.5%, 94.0% and 95.0%, respectively. Also, the T-P removal efficiencies in the same condition were 10.8%, 34.6%, 51.2%, 70.6% and 88.5%, respectively. Therefore, the proper ORP value considering the removal efficiencies of Ni and T-P was determined to be 800 mV.

목차

등록된 정보가 없습니다.

참고문헌 (10)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0