지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Structural Engineering and Mechanics, An Int'l Journal Structural Engineering and Mechanics, An Int'l Journal Vol.70 No.2
- 발행연도
- 2019.1
- 수록면
- 233 - 243 (11page)
이용수
초록· 키워드
오류제보하기
This paper depicts the development and characterizations of laminated composites made with cellulosic giant cane (Arundinaria gigantea) fiber mats and epoxy resin. Zirconia-toughened mullite (ZTM) is used as a filler material in the laminated composite which was prepared from sillimanite through plasma processing technique. The mechanical characterizations of this composite have been carried out as per ASTM standards to evaluate its usability as a structural material. The effects of varying weight percentages of the filler and two different fiber orientations namely, angle-ply [+45°/-45°/+45°] and balanced cross-ply [0°/90°/0°] on the physical and mechanical properties such as density, microhardness, impact strength, tensile strength and interlaminar shear strength of the layered composite specimens have been investigated. The study indicates that the inclusion of zirconia-toughened mullite in the composite laminate as filler improves its mechanical properties. Moreover, the use of giant cane fiber mat in the laminate is more eco-friendly than the synthetic fibers. This research also helps in generating additional data to enrich the repository of natural fiber reinforced laminated composites.
목차
등록된 정보가 없습니다.
참고문헌 (42)
참고문헌 신청
Amnieh, H. B. / 2018 / Dynamic analysis of non-homogeneous concrete blocks mixed by SiO2 nanoparticles subjected to blast load experimentally and theoretically / Constr. Build. Mater 174:633~644
Ali Jafarian Arani / 2016 / Buckling analysis of embedded concrete columns armed with carbon nanotubes / Computers and Concrete, An International Journal 17(5):567~578
Babak Safari Bilouei / 2016 / Buckling of concrete columns retrofitted with Nano-Fiber Reinforced Polymer (NFRP) / Computers and Concrete, An International Journal 18(5):1053~1063
Bisen, H. B. / 2018 / Numerical study of Frequency and deflection responses of natural fiber (Luffa) reinforced polymer composite and experimental validation / J. Nat. Fib. :1~15
Biswas, S. / 2011 / Effect of fiber loading and orientation on mechanical and erosion wear behaviors of glass-epoxy composites / Polym. Compos 32(4):665~674
Ali Jafarian Arani / 2016 / Buckling analysis of embedded concrete columns armed with carbon nanotubes / Computers and Concrete, An International Journal 17(5):567~578
Babak Safari Bilouei / 2016 / Buckling of concrete columns retrofitted with Nano-Fiber Reinforced Polymer (NFRP) / Computers and Concrete, An International Journal 18(5):1053~1063
Bisen, H. B. / 2018 / Numerical study of Frequency and deflection responses of natural fiber (Luffa) reinforced polymer composite and experimental validation / J. Nat. Fib. :1~15
Biswas, S. / 2011 / Effect of fiber loading and orientation on mechanical and erosion wear behaviors of glass-epoxy composites / Polym. Compos 32(4):665~674
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
유리/바살트/아라미드 섬유 복합재료의 적층구조에 따른 기계적 특성의 영향
한국기계기술학회지
2021 .08
-
Enhancement of the in-Plane Shear Properties of Carbon Fiber Composites Containing Carbon Nanotube Mats
Metals and Materials International
2015 .01
-
Mechanical properties of zirconia toughened mullite composites fabricated by slip casting
Journal of Ceramic Processing Research
2019 .01
-
Evaluation of Strength Transition Rate for 6.8 L Composite Pressure Vessel Using Domestic High Strength Carbon Fiber
Journal of the Korean Society for Precision Engineering
2020 .11
-
적층구조해석을 활용한 3차원 직조 프리폼 T빔의 개발
대한기계학회 춘추학술대회
2020 .07
-
Investigation on interlaminar shear stresses in laminated composite beam under thermal and mechanical loading
Steel and Composite Structures, An International Journal
2015 .01
-
Experimental investigating the properties of fiber reinforced concrete by combining different fibers
Computers and Concrete, An International Journal
2020 .01
-
사출 소재 주입 위치에 따른 단섬유 강화 복합소재 구조물의 면내/두께 방향 섬유배향 특성 분석
한국생산제조학회 학술발표대회 논문집
2022 .12
-
Effect of Milled Carbon Fiber on the Mechanical and Thermal Properties of Carbon Fiber/ABS Composites
한국고분자학회 학술대회 연구논문 초록집
2019 .10
-
보트에 적용되는 하이브리드 복합재에 대한 기계적 특성 연구
대한용접·접합학회지
2016 .04
-
Self-healing fiber-reinforced composite
대한기계학회 춘추학술대회
2019 .04
-
Fiber loading effect on the mechanical and thermal properties of nickel-coated carbon fiber/polypropylene composites
한국고분자학회 학술대회 연구논문 초록집
2015 .04
-
아마/마닐라삼 단섬유 복합재의 제조 및 기계적 물성 평가 연구
대한기계학회 춘추학술대회
2021 .05
-
섬유 배향 오차를 고려한 테이퍼 복합 적층 튜브의 이론적 설계 및 검증
대한기계학회 춘추학술대회
2015 .11
-
A study on the change of mechanical strength according to the mixing conditions of recycled carbon fiber
한국생산제조학회 학술발표대회 논문집
2022 .05
-
Micromechanical analysis on fiber reinforced polymer composites produced by an injection molding process
플라스틱가공 심포지엄(한일 공동 세미나)
2018 .08
-
Effective Material Properties of Composite Materials by Using a Numerical Homogenization Approach
한국기계가공학회지
2019 .12
-
섬유혼입률 및 섬유길이 변화에 따른 탄소섬유 보강시멘트 복합재료의 역학적 특성과 내충격성 검토
한국구조물진단유지관리공학회 논문집
2019 .01
-
코이어섬유매트의 알칼리처리에 사용한 NaOH 용액의 농도와 온도가 코이어섬유매트/불포화폴리에스터 복합재료의 기계적 특성에 미치는 영향
폴리머
2021 .07
-
Improvement of bending properties by alkali surface treatment in flax fiber composites
대한기계학회 춘추학술대회
2021 .06
이 논문의 저자 정보
최근 본 자료
댓글(0)
0