지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국고분자학회 폴리머 폴리머 제45권 제3호
- 발행연도
- 2021.5
- 수록면
- 390 - 397 (8page)
- DOI
- 10.7317/pk.2021.45.3.390
이용수
초록· 키워드
오류제보하기
The improvement in mechanical properties of biodegradable and sustainable materials like natural fibers turns out to be exceptionally appealing from the financial and biological perspectives. This is achieved by hybridization technique in which different fiber orientations can be adjusted in various arrangements providing variety in its properties. In this study, the authors used different natural fibers in hybridization with glass fibers. The tensile strength of varying glass/sisal and glass/jute contents within the composites were compared. Besides, the effect of hybridization was analyzed. Results revealed that all hybrid composites show low tensile strength as compared to the non-hybrid composites. However, in hybrid composites, the laminate containing a single layer of sisal fiber has shown almost the same tensile strength as non-hybrid composites. Based on results, it is suggested that flax is an appropriate natural fiber to replace E-glass for applications requiring similar strength.
목차
Abstract
Introduction
Experimental
Results and Discussion
Conclusions
References
참고문헌 (29)
참고문헌 신청
Al Rashid, A.; Khan, S. A.; Al-Ghamdi, S. G.; Koç, M. Additive Manufacturing: Technology, Applications, Markets, and Opportunities for The Built Environment. Autom. Constr. 2020, 118, 103268.
Gholampour, A.; Ozbakkaloglu, T. A Review of Natural Fiber Composites: Properties, Modification and Processing Techniques, Characterization, Applications. J. Mater. Sci. 2020, 55, 829-892.
Jaafar, J.; Siregar, J. P.; Salleh, S. M.; Hamdan, M. H. M.; Cionita, T.; Rihayat, T. Important Considerations in Manufacturing of Natural Fiber Composites: A Review. Int. J. Precis. Eng. Manuf.-Green Technol. 2019, 6, 647-664.
Khalid, M. Y.; Nasir, M. A.; Ali, A.; Al Rashid, A.; Khan, M. R. Experimental and Numerical Characterization of Tensile Property of Jute/Carbon Fabric Reinforced Epoxy Hybrid Composites. SN Appl. Sci. 2020, 2, 1-10.
Ali, A.; Nasir, M. A.; Khalid, M. Y.; Nauman, S.; Shaker, K.; Khushnood, S.; Altaf, K.; Zeeshan, M.; Hussain, A. Experimental and Numerical Characterization of Mechanical Properties of Carbon/Jute Fabric Reinforced Epoxy Hybrid Composites. J. Mech. Sci. Technol. 2019, 33, 4217-4226.
Gholampour, A.; Ozbakkaloglu, T. A Review of Natural Fiber Composites: Properties, Modification and Processing Techniques, Characterization, Applications. J. Mater. Sci. 2020, 55, 829-892.
Jaafar, J.; Siregar, J. P.; Salleh, S. M.; Hamdan, M. H. M.; Cionita, T.; Rihayat, T. Important Considerations in Manufacturing of Natural Fiber Composites: A Review. Int. J. Precis. Eng. Manuf.-Green Technol. 2019, 6, 647-664.
Khalid, M. Y.; Nasir, M. A.; Ali, A.; Al Rashid, A.; Khan, M. R. Experimental and Numerical Characterization of Tensile Property of Jute/Carbon Fabric Reinforced Epoxy Hybrid Composites. SN Appl. Sci. 2020, 2, 1-10.
Ali, A.; Nasir, M. A.; Khalid, M. Y.; Nauman, S.; Shaker, K.; Khushnood, S.; Altaf, K.; Zeeshan, M.; Hussain, A. Experimental and Numerical Characterization of Mechanical Properties of Carbon/Jute Fabric Reinforced Epoxy Hybrid Composites. J. Mech. Sci. Technol. 2019, 33, 4217-4226.
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Microstructural analysis and experimental investigation of mechanical properties of epoxy based hybrid composite reinforced with flax, sisal and luffa fibre
Journal of Ceramic Processing Research
2022 .08
-
Effect of hybridization and hybrid fiber dispersion on the mechanical properties of glass/flax vinyl ester composites
대한기계학회 춘추학술대회
2019 .05
-
Effect of Alkali Treatment on Mechanical Properties of Banana – Sisal Fiber Reinforced Composites
대한기계학회 춘추학술대회
2022 .11
-
섬유화 온도 변화에 따른 E-glass fiber의 물리적 특성
한국재료학회지
2017 .01
-
Rheological and Mechanical Properties of Kenaf and Jute Fiber‑Reinforced Cement Composites
International Journal of Concrete Structures and Materials
2023 .03
-
보트에 적용되는 하이브리드 복합재에 대한 기계적 특성 연구
대한용접·접합학회지
2016 .04
-
저유전율을 가지는 D-Glass Fiber의 제조 및 특성
한국재료학회지
2018 .01
-
흡습 환경 하의 폴리프로필렌/유리 섬유 강화 복합재료의 환경 열화 특성
한국해양공학회지
2016 .12
-
Experimental investigating the properties of fiber reinforced concrete by combining different fibers
Computers and Concrete, An International Journal
2020 .01
-
유리섬유 코팅사와 탄소섬유를 이용한 일방향 탄소섬유시트 제조 공정이 콘크리트 보강에 미치는 영향
한국염색가공학회지
2022 .09
-
Effective Material Properties of Composite Materials by Using a Numerical Homogenization Approach
한국기계가공학회지
2019 .12
-
Drop Weight Impact and Tension-Tension Loading Fatigue Behaviour of Jute/Carbon Fibers Reinforced Epoxy-based Hybrid Composites
폴리머
2020 .09
-
Hybrid Effects of Surface Treated Pitch-based Short Carbon Fiber and Short Glass Fiber Reinforced Thermoplastic Composites
한국고분자학회 학술대회 연구논문 초록집
2019 .10
-
Surface Modified Glass-Fiber Effect on the Mechanical Properties of Glass-Fiber Reinforced Polypropylene Composites
Elastomers and composites
2019 .01
-
슬래그 원료를 사용해서 제조된 유리섬유의 점탄성 특성
전기전자재료학회논문지
2019 .01
-
Mechanical and fracture properties of glass fiber reinforced geopolymer concrete
Advances in concrete construction
2018 .01
-
Experimental Investigation of Drilling Characteristics of Jute Fiber Reinforced Graphene Filled Epoxy Nanocomposites
폴리머
2018 .07
-
하이브리드 직물을 이용한 열가소성 섬유강화 복합재료의 제조 및 물성연구
폴리머
2023 .07
-
Study on the Characterization of Glass Fibers by Fluorination Treatment
한국고분자학회 학술대회 연구논문 초록집
2021 .04
-
유리/바살트/아라미드 섬유 복합재료의 적층구조에 따른 기계적 특성의 영향
한국기계기술학회지
2021 .08
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2021-578-001747865