지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국유체기계학회 International Journal of Fluid Machinery and Systems International Journal of Fluid Machinery and Systems Vol.14 No.1
- 발행연도
- 2021.3
- 수록면
- 25 - 33 (9page)
- DOI
- 10.5293/IJFMS.2021.14.1.025
이용수
초록· 키워드
오류제보하기
The most widely of hydraulic applications power employed source that including low manufacturing costs and good performance are defined as the external gear pumps. In this study, the using of unstandard gears and influence on the performance of gear pumps are studied. These influences include pulsation factor of flow rate, flow rate of pump and trapped volume between two meshing gears. Matlab software has been used to evaluate performance by modifying algorithm and deriving the equations of pump flow rate. The unstandard gear is used in the study undertaken with +0.3 Rack shift coefficient. Results indicated the using of unstandard gears increase flow rate and reduce the trapped volume and pulsation flow rate factor. It was concluded that the factor of pulsation flow rate reduces as increase of teeth number which leads to pulsation flow rate stabilization.
목차
Abstract
1. Introduction
2. Physical model
3. Results and Discussion
4. Conclusions
References
참고문헌 (20)
참고문헌 신청
Liping C / 2011 / Modeling and Simulation of Gear Pumps based on Medelica / M works / Proceedings 8th Modelica Conference, Dresden, Germany :421~429
Egbe, E.A.P / 2013 / Design Analysis and Testing of a Gear Pump / International Journal of Engineering and Science, 3(2):1~7
Rana, D.A / 2015 / Perf”ormance evaluation of external gear pump with the used of burnt oil / International Journal of Advanced Technology in Engineering and Science 3(Special Issue No. 1):466~473
Yoshida, N / 2016 / Theoretical Analysis of Flow Characteristics and Bearing Load for Mass - Produced External Gear Pump / Jtekt Engineering Journal, (1013E):45~52
Wang, W / 2017 / Study on Flow Characteristic of Gear Pumps by Gear Tooth Shapes / Journal of Applied Science and Engineering 20(3):367~372
Egbe, E.A.P / 2013 / Design Analysis and Testing of a Gear Pump / International Journal of Engineering and Science, 3(2):1~7
Rana, D.A / 2015 / Perf”ormance evaluation of external gear pump with the used of burnt oil / International Journal of Advanced Technology in Engineering and Science 3(Special Issue No. 1):466~473
Yoshida, N / 2016 / Theoretical Analysis of Flow Characteristics and Bearing Load for Mass - Produced External Gear Pump / Jtekt Engineering Journal, (1013E):45~52
Wang, W / 2017 / Study on Flow Characteristic of Gear Pumps by Gear Tooth Shapes / Journal of Applied Science and Engineering 20(3):367~372
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Simulation and Test of Gear Pump Flow Pulsation
International Journal of Fluid Machinery and Systems
2018 .09
-
Investigation of Pressure Pulsations and Flow Instabilities in a Centrifugal Pump at Part-load Conditions
International Journal of Fluid Machinery and Systems
2017 .12
-
Instability Prediction of Valve Motion and Internal Flow in Novel Large-scale Reciprocating Pump
International Journal of Fluid Machinery and Systems
2019 .03
-
Investigation of Unsteady Pressure Pulsation and Internal Flow in a Centrifugal Pump under Low Flow Rate
International Journal of Fluid Machinery and Systems
2019 .09
-
사류펌프의 압력맥동특성 분석
한국유체기계학회 논문집
2020 .10
-
압력맥동측정장치를 통한 펌프 유량맥동 측정 및 해석모델 개발
유공압건설기계학회 학술대회논문집
2016 .06
-
Hydraulic Loss and Internal Flow of a Pump Equipped with an Impeller with Radial and Annular Flow Channels
International Journal of Fluid Machinery and Systems
2023 .03
-
Flow Features of a Prefabricated Pumping Station Operating under High Flow Rate Conditions
International Journal of Fluid Machinery and Systems
2018 .06
-
Experimental and numerical investigation on the pressure pulsation in reactor coolant pumps under different inflow conditions
Nuclear Engineering and Technology
2023 .04
-
Pressure Pulsation Characteristics of a Model Pump-turbine Operating in the S-shaped Region : CFD Simulations
International Journal of Fluid Machinery and Systems
2017 .09
-
An Experimental Investigation of the Air Injection Effect on the Vortex Structure and Pulsation Characteristics in the Francis Turbine
International Journal of Fluid Machinery and Systems
2020 .03
-
Research on non-uniform pressure pulsation of the diffuser in a nuclear reactor coolant pump
Nuclear Engineering and Technology
2021 .03
-
Experimental and Numerical Studies on Flow Characteristics of Centrifugal Pump under Air-water Inflow
International Journal of Fluid Machinery and Systems
2019 .03
-
파워유닛의 맥동 현상 측정 실험에 관한 연구
유공압건설기계학회 학술대회논문집
2020 .12
-
Analysis of coasting-down hydrodynamic characteristics of sodium pump in the primary circuit of fast reactor
International Journal of Fluid Machinery and Systems
2022 .06
-
The Effect of Pump Intake Leaning Angle and Flow Rate on the Internal Flow of Pump Sump
한국유체기계학회 논문집
2017 .02
-
공기열원 히트펌프 융복합시스템의 최적제어를 위한 해석적 연구: 부하율 및 펌프유량에 따른 시스템 성능검토
설비공학논문집
2022 .11
-
A Multichannel Electroosmotic Flow Pump Using Liquid Metal Electrodes
BioChip Journal
2019 .01
-
축류펌프 입구 절대 유동각이 저유량 영역의 성능곡선 기울기와 불안정 유동 현상에 미치는 영향
한국유체기계학회 학술대회 논문집
2023 .12
-
PIV Measurement of Internal Flow in Mini Centrifugal Pump
International Journal of Fluid Machinery and Systems
2019 .12
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2021-554-001653444