메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
최정 (전남대학교) 정종민 (전남대학교) 전용석 (전남대학교)
저널정보
대한설비공학회 설비공학논문집 설비공학논문집 제33권 제4호
발행연도
2021.4
수록면
190 - 198 (9page)
DOI
10.6110/KJACR.2021.33.4.190

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The objective of this study is to decrease the refrigerant temperature at the compressor outlet under high thermal load conditions with low-GWP refrigerants in the showcase vapor compression cycle. When the outside temperature increases, the showcase cycle suffers a reliability problem due to the high discharge temperature. Liquid injection is a good method for decreasing the discharge temperature of the refrigeration cycle. This study presents the development of a simplified simulation model for predicting the performance of a liquid injection showcase cycle. The optimum injection pressures of the showcase cycle with R410A and R32 were presented. In addition, after the quasi-saturation compression cycle was reached through the multi-stage liquid injection control, the effect of reducing the discharge temperature was analyzed. Finally, the optimal number of injections for each of the refrigerant and operating conditions was presented.

목차

Abstract
1. 연구배경 및 목적
2. 쇼케이스 용 인젝션 사이클 성능 해석
3. 해석 결과 및 고찰
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2021-553-001643769