지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2016.1
- 수록면
- 67 - 80 (14page)
이용수
초록· 키워드
오류제보하기
The objective of the present work is to optimize process parameters namely, cutting speed, feed rate, and depth of cut in milling of AISI 304 stainless steel. In this work, experiments were carried out as per the Taguchi experimental design and an $L_{27}$ orthogonal array was used to study the influence of various combinations of process parameters on surface roughness (Ra) and material removal rate (MRR). As a dynamic approach, the multiple response optimization was carried out using grey relational analysis (GRA) and desirability function analysis (DFA) for simultaneous evaluation. These two methods are considered in optimization, as both are multiple criteria evaluation and not much complicated. The optimum process parameters found to be cutting speed at 63 m/min, feed rate at 600 mm/min, and depth of cut at 0.8 mm. Analysis of variance (ANOVA) was employed to classify the significant parameters affecting the responses. The results indicate that depth of cut is the most significant parameter affecting multiple response characteristics of GFRP composites followed by feed rate and cutting speed. The experimental results for the optimal setting show that there is considerable improvement in the process.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Statistical characterisation of end milling of AISI 52100 annealed bearing steel
Advances in materials research : AMR
2018 .01
-
엔드밀가공에서 커터회전방향에 따른 절삭력의 최적화
반도체디스플레이기술학회지
2017 .01
-
공구재종에 따른 엔드밀 가공의 절삭력에 관한 통계적해석
반도체디스플레이기술학회지
2016 .01
-
Multi response optimization of surface roughness in hard turning with coated carbide tool based on cutting parameters and tool vibration
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
Application of Bat algorithm for Improvement of Surface Integrity in Turning of AISI 304 Austenitic Stainless Steel
Journal of the Korean Society for Precision Engineering
2021 .04
-
Effects of coating material and cutting parameters on the surface roughness and cutting forces in dry turning of AISI 52100 steel
Structural engineering and mechanics : An international journal
2017 .01
-
Machining parameter investigation of Ti-6Al-4V alloy on milling process with Al2O3 Nano hybrid cutting fluid
Journal of Ceramic Processing Research
2024 .08
-
STS304합금의 선삭가공에서 표면거칠기의 최적화
반도체디스플레이기술학회지
2017 .01
-
스테인리스 스틸 밀링 가공 시 해석 모델 최적화 연구
한국생산제조학회 학술발표대회 논문집
2021 .07
-
Evaluation of the effect of cutting conditions on surface integrity the turning
한국생산제조학회 학술발표대회 논문집
2020 .10
-
AISI 316LN 소재 밀링 가공 시 소성 변형 해석 연구
한국생산제조학회 학술발표대회 논문집
2019 .11
-
AISI 4340강의 방전가공에서 공정변수의 최적화
반도체디스플레이기술학회지
2019 .01
-
Analysis of cutting forces and roughness during hard turning of bearing steel
Structural engineering and mechanics : An international journal
2018 .01
-
AISI 1020 CD-Bar 절삭가공 시 절삭조건이 절삭면에 미치는 영향
한국기계기술학회지
2023 .06
-
Analysis of the Cutting Shape as a Function of Feed Rate and Cutting Speed of Korean and Japanese Combines
바이오시스템공학(구 한국농업기계학회지)
2017 .01
-
Multi-response optimisation for turning of magnesium alloy with untreated and cryogenic treated carbide inserts by grey relational analysis
Journal of Ceramic Processing Research
2023 .02
-
Experimental investigation and optimization for surface roughness for turning of AISI 1040 steel
Journal of Ceramic Processing Research
2022 .06
-
통계적 분석기법을 활용한 가공 변수 최적화
한국기계가공학회 춘추계학술대회 논문집
2021 .06
-
Machinability investigation of gray cast iron in turning with ceramics and CBN tools: Modeling and optimization using desirability function approach
Structural Engineering and Mechanics, An Int＇l Journal
2023 .04
-
두께 50 ㎜ 스테인리스강의 수중 및 대기중 레이저 절단 특성 비교
대한용접학회 특별강연 및 학술발표대회 개요집
2020 .11
이 논문의 저자 정보
최근 본 자료
댓글(0)
0